542947
91
Zoom out
Zoom in
Previous page
1/108
Next page
When Change the paper A4/LTR/LGL Plain paper is displayed on the LCD, the paper settings
are incorrect.
In FAX paper settings, set Page size to A4, Letter, LTR, or Legal. Set Media type to Plain
paper.
* Some of page sizes are not available depending on the country or region of purchase.
Errors When You Send a Fax
If an error occurs when you send a fax, the error number is printed on ERROR TX REPORT (there are
some errors for which the cause is also printed).
The causes corresponding to the error numbers are as follows.
No. Cause
Action
#001
Document is jammed in
the ADF.
The document is jammed in the ADF.
When the error is cleared, redo the operation.
#003 Document is too long.
You attempted to send a document longer than 15.75 inches /
400 mm.
You cannot send a document longer than 15.75 inches / 400
mm from the ADF.
"#003" is also printed if it takes time to send a page. Divide the
document or set the image quality (Fax resolution) to a lower
setting, then resend it.
#005 No answer.
The recipient's fax machine does not respond.
Contact the recipient and have the recipient check that the
telephone line is connected correctly.
#012 Try again.
There is no paper in the recipient's fax machine.
Contact the recipient and have the recipient load paper.
#017 No tone is detected.
The machine could not detect the dial tone.
Dial tone detect in Adv. FAX settings under Fax settings is
set to ON. Set to OFF.
Adv. FAX settings
#018 Line was busy.
The fax/telephone number you dialed is busy.
Try dialing again after waiting for a moment.
#022 Number is deleted.
The fax/telephone number registered to the memory dial is
incorrect.
Check the recipient's fax/telephone number, correct the fax/
telephone number registered to the memory dial code, then
send the document again.
Changing Registered Information
#037 Memory is full.
The machine could not send a fax because its memory is full.
Delete contents in memory, then send a fax again.
Document Stored in Machine's Memory
#059
Transmission has been
canceled due to a fax
information mismatch.
Transmission has been canceled because the machine could
not detect the recipient's fax machine information or the
information did not match the dialed number. This message is
displayed when Check RX FAX info in Security control
under Fax settings is set to ON.
For details, see Sending Faxes after Checking Information
(Checking the Recipient's Information).
#085
Try again in black & white
transmission.
The recipient's fax machine is not color-compatible.
Resend the document in black & white.
#099
The Stop button was
pressed during
transmission.
The Stop button was pressed to cancel transmission of the
document. Resend it if necessary.
#412
The fax could not be sent
from the computer.
The fax could not be sent from the computer (Windows only).
Ensure that the machine is connected with the computer
correctly and redo operation.
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma MX 395 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma MX 395 series in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Pixma MX 395 series

Canon Pixma MX 395 series Additional guide - English - 170 pages

Canon Pixma MX 395 series Additional guide - English - 117 pages

Canon Pixma MX 395 series Additional guide - English - 174 pages

Canon Pixma MX 395 series Usermanual and installation guide - English - 127 pages

Canon Pixma MX 395 series Additional guide - German - 113 pages

Canon Pixma MX 395 series Additional guide - German - 180 pages

Canon Pixma MX 395 series Additional guide - German - 124 pages

Canon Pixma MX 395 series Additional guide - German - 178 pages

Canon Pixma MX 395 series User Manual - German - 132 pages

Canon Pixma MX 395 series Additional guide - Dutch - 112 pages

Canon Pixma MX 395 series Additional guide - Dutch - 179 pages

Canon Pixma MX 395 series Additional guide - Dutch - 122 pages

Canon Pixma MX 395 series Additional guide - Dutch - 178 pages

Canon Pixma MX 395 series User Manual - Dutch - 131 pages

Canon Pixma MX 395 series Quick start guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info