460512
98
Zoom out
Zoom in
Previous page
1/128
Next page
96 Chapter 10
Troubleshooting
Cannot Print Properly From The Digital Camera
The following are the possible errors that may occur when printing directly from a digital still camera
or digital video camcorder*, and the countermeasures to eliminate them.
*Hereafter, the digital still camera and digital video camcorder are collectively called a digital camera
or camera.
Note
z PictBridge compatible digital cameras can be connected to your machine for
direct printing.
z This section describes errors that are indicated on Canon-brand PictBridge-
compatible cameras. The error messages and operations may vary
depending on the camera you are using. If you are using a non-Canon
PictBridge compatible camera and not sure how to clear the error from the
camera, confirm the message displayed on the LCD of the machine and clear
the error. For clearing an error from the machine, see “An Error Message Is
Displayed On The LCD/LED” on page 86.
z A communication time out occurs if printing takes a long time or if it takes too
much time to send data. This may stop printing. In such cases, disconnect the
cable between the machine and the camera, and reconnect the cable
between the machine and the camera. Then, turn the camera on, if it does not
automatically turn on. If the problem is still unresolved, select some other
photo and check if it can be printed.
z Your PictBridge compatible device may need to be switched to printing mode
before it is connected to the machine, depending on the model of the device.
Also, it may need to be turned on manually or switched to replay mode after
connected to the machine. Refer to the instruction manuals supplied with your
camera and take the necessary steps before connection.
z The FINE Cartridge nozzles may be clogged if printing becomes faint or
colors are incorrect. See “When Printing Becomes Faint Or Color Is Incorrect
on page 75.
z If the paper is curled or its surface is scratched during printing, make sure that
you are using the correct type of paper.
z For the errors indicated on the camera and their solution, also refer to the
user’s manual of the camera. For other troubles with a digital camera, contact
the manufacturer of the camera.
Error message on camera Action
Printer in use/Printer warming up Photos are printed from the computer.
Wait until printing ends. If the machine is warming up, wait until warm-
up ends.
No paper/Paper error Load paper in the Auto Sheet Feeder and press [OK] (MP180) / [Black]
or [Color] (MP160) on the machine.
If the Paper Output Tray is closed, open it. Printing is resumed.
Paper jam Remove the jammed paper, load new paper, and press [OK] (MP180) /
[Black] or [Color] (MP160) on the machine and retry printing.
Printer cover open Close the Scanning Unit on the machine.
No print head The FINE Cartridge may not be installed properly, or the Cartridge may
not be the compatible with this machine. Install the appropriate FINE
Cartridge. If lines are misaligned or the resulting output is not
satisfactory, carry out the FINE Cartridge Alignment.
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma MP180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma MP180 in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info