460512
65
Zoom out
Zoom in
Previous page
1/128
Next page
Chapter 7 63
Printing Photographs Directly From A Digital Camera
z About “Layout” and “Trimming”
For “Layout”, when the “Default setting” (selections based on the machine setting) is
selected, the machine operates based on the bordered/borderless setting specified in the
Memory card mode of the machine (MP180) or the Fit-to-Page setting when Photo Paper
is selected on the Operation Panel of the machine (MP160). Trimming is performed based
on settings on the PictBridge-compliant device.
z About “Image optimize”
When “Default setting” (selections based on the machine setting) is selected, the machine
operates based on the <IMAGE ENHANCEMENT> settings mode using the controls of the
machine (MP180).
If you use a Canon PictBridge-compliant device, you can select “VIVID”, “NR”, “VIVID+NR”
or “FACE”.
(Note that these options cannot be selected for some models.)
z About “Date/File No. print”
By default, “Off” is selected for this machine.
If you select an image which has had the shooting date embedded in it using a camera with
the print mode, select “Off” for this function. If you select “Date”, “File No.”, or “Both”, the
date and/or file number will be printed over the embedded date (MP180).
Note
z When printing onto Photo Stickers (PS-101) (16-up), use the following
settings.
1. Load Photo Stickers (PS-101) in the Auto Sheet Feeder.
2. Select “10 x 15 cm / 4" x 6"” for the “Page size”, and “Photo” for the
“Media type”.
3. Select “N-up” for layout, then select “16”.
z Some PictBridge compliant devices display the Layout option; 2-up, 4-
up, 9-up, and 16-up. In this case always select “16-up”. If there are no
options on the PictBridge compliant device that correspond to 2-up, 4-
up, 9-up, or 16-up, printing on stickers is not possible.
z When you are using Photo Stickers (PS-101), do not set “Borderless
Printing” in “Layout” settings.
Note
z When “VIVID” is selected, the green and blue portions of photos are
printed more vividly.
z When “NR” (Noise Reduction) is selected, noise in blue portions, such
as the sky, and dark portions is removed.
z When “VIVID+NR” is selected, functions of both “VIVID” and “NR” are
performed.
z When “FACE” is selected, a darkened face on the photo taken against
the light is brightened.
Note
z Never disconnect the USB cable during printing.
z When disconnecting the USB cable between the device and machine,
follow the instructions given in the instruction manual of the device.
z Controls of the device cannot be used for the following:
Print quality setting
Machine maintenance
z For the device operation method and troubleshooting, refer to your
digital device’s manual.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma MP180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma MP180 in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info