37306
96
Zoom out
Zoom in
Previous page
1/128
Next page
94 Chapter 10
Troubleshooting
Inappropriate paper type is used.
z Check to see if the paper you are printing on is too thick. See “General
Paper Guidelines” on page 16.
z Note that smudging may occur at the top and bottom edges of the
paper when using Borderless Printing. Ensure that the paper you are
using is compatible with Borderless Printing.
Thick paper is used. When printing on thick paper, set the Paper Thickness Lever to the right.
This widens the gap between the FINE Cartridge and the paper. Try this
maneuver if the printed surface is scratched.
Media is curled. If all four corners or the printing surface of the paper is curled, the paper
may become dirty or may not feed properly. Use the paper after correcting
paper curl as follows.
1. Place the printing surface face up (A), and cover it with a sheet of non-
printing regular paper to avoid damaging the surface.
2. Roll up the paper in the direction opposite to the paper curl as per the
figure below.
3. Check the printing paper to confirm if the paper curl is eliminated to
within approximately 2 to 5mm / 0.08 to 0.2 in (B).
It is recommended to print the curl-corrected paper one sheet at a time.
The media type is not selected
correctly in the printer driver.
On the [Main] tab of the printer driver, ensure that the [Media Type]
selected matches the paper loaded.
In the [Print] dialog box of the printer driver, select [Quality & Media] from
the pop-up menu, and then ensure that the [Media Type] selected matches
the paper loaded.
Paper is loaded incorrectly. Load in the portrait orientation regardless of the print direction of the
Auto Sheet Feeder.
Ensure that paper is loaded correctly. Slide the paper guides against the
paper stack.
Cause Action
(A)
(A)
(B)
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma MP170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma MP170 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info