459147
89
Zoom out
Zoom in
Previous page
1/108
Next page
85Troubleshooting
Error Message Appears on a PictBridge Compliant
Device
The following are the possible errors that may occur when printing directly from a PictBridge
compliant device, and the actions to resolve them.
Note
z This section describes errors that are indicated on Canon-brand PictBridge compatible device. The
error messages and operations may vary depending on the device you are using.
For errors on non-Canon PictBridge compliant devices, check the error message displayed on the LCD
and take the appropriate action to clear the error. For details, see “An Error Message Is Displayed on
the LCD” on page 68.
z For the errors indicated on the PictBridge compliant device and their solution, also refer to the
instruction manual of the device. For other troubles on the device, contact the manufacturer.
Error Message On
PictBridge Compliant
Device
Action
“Printer in use” If the machine is printing from the computer or warming up, wait until the job
ends. When it is ready, the machine starts printing automatically.
“No paper” Load paper in the Rear Tray, and select Continue* in the display on your
PictBridge compliant device.
* To resume printing, you can also press the OK button on the machine instead
of selecting Continue.
“Paper Error” / "Media type error" The Front Tray is selected on the machine. Load paper in the Rear Tray, press
the Paper Feed Switch to select the Rear Tray as the paper source, and then
press the OK button on the machine or select Stop in the display on your
PictBridge compliant device to print again.
For details, see “Changing the Paper Source” on page 12.
“Paper jam” Select Stop in the display on your PictBridge compliant device to stop printing.
Remove the jammed paper, load new paper, press the OK button on the
machine and try printing again.
“Printer cover open” Close the Scanning Unit (Printer Cover) on the machine.
“No Print Head” The Print Head is not installed or is defective.
For details on how to resolve the error, see “Print head is not installed. Install
the print head. U051” in “An Error Message Is Displayed on the LCD” on
page 68.
“Waste tank full” / “Ink absorber full” The ink absorber is nearly full.
For details on how to resolve the error, see “The ink absorber is almost full.
Press OK to continue printing. Contact the service center.” in “An Error
Message Is Displayed on the LCD” on page 68.
“No ink” / "Ink cassette error" The ink tank is not installed properly or empty.
See the error message displayed on the LCD and take the appropriate action to
resolve the error. See “An Error Message Is Displayed on the LCD” on page 68.
“Ink Error” An ink tank that was once empty is installed.
For details on how to resolve the error, see “The remaining level of the following
ink cannot be correctly detected. Replace the ink tank. U130” in “An Error
Message Is Displayed on the LCD” on page 68.
“Hardware Error” An ink tank error has occurred. Replace the ink tank. See “Replacing an Ink
Tank” on page 43.
MP520_QSG_US.book Page 85 Thursday, May 31, 2007 5:55 PM
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma MP 520 series Quickstart at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma MP 520 series Quickstart in the language / languages: English as an attachment in your email.

The manual is 6,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Pixma MP 520 series Quickstart

Canon Pixma MP 520 series Quickstart User Manual - German - 363 pages

Canon Pixma MP 520 series Quickstart User Manual - German - 353 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info