469895
863
Zoom out
Zoom in
Previous page
1/1037
Next page
status of the Print Head.
Routine Maintenance
Paper of size other than A4 or Letter is loaded
in the Rear Tray.
Press the
OK
button on the machine to
dismiss the error, then load a sheet of A4/
Letter-sized Canon Matte Photo Paper MP-101
with the printing side (whiter side) facing UP in
the Rear Tray.
For Automatic Print Head Alignment, always
load paper in the Rear Tray.
The Paper Output Slot is exposed to strong
light.
Press the
OK
button to dismiss the error
message, and then adjust your operating
environment and/or the position of the
machine so that the Paper Output Slot is not
exposed directly to strong light.
After carrying out the above measures, if the
problem continues after aligning the Print Head
again, press the
OK
button to dismiss the error,
and then perform Manual Print Head Alignment.
Manual Print Head Alignment
An unsupported USB hub is connected.
Remove the hub.
If a PictBridge compliant device is connected via a
USB hub, remove the hub and connect it directly to
the machine.
B200
Printer error has occurred.
Unplug the power cord and contact the service
center.
Turn off the machine, and unplug the power cord
of the machine from the power supply.
Contact the service center.
****
Printer error has occurred.
Turn off power then back on again.
If problem persists, see the manual.
"****" is displayed in the alphanumeric character
and depends on the error occurred.
5100/5110 is displayed:
Cancel printing, and turn off the machine. Then
clear the jammed paper or protective material
that is preventing the Print Head Holder from
moving, and turn on the machine again.
Important
Be careful not to touch the components
inside the machine. The machine may
not print out properly if you touch it.
If the problem is not resolved, contact the
service center.
6000 is displayed:
If any object is placed in front of the machine,
remove it.
Open the Paper Output Tray gently, then turn
the power off and back on.
In other cases:
Turn off the machine, and unplug the power
cord of the machine from the power supply.
Plug the machine back in and turn the
machine back on.
If the problem is not resolved, contact the
service center.
Scanner is not operating correctly. Turn off the machine, and unplug the power cord
of the machine from the power supply.
After a while, plug the power cord of the machine
back in, and then turn on the machine. If the same
Page 863 of 1037 pagesAn Error Message Is Displayed on the LCD
863


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon PIXMA MG5200 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon PIXMA MG5200 series in the language / languages: English as an attachment in your email.

The manual is 18,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon PIXMA MG5200 series

Canon PIXMA MG5200 series User Manual - German - 1102 pages

Canon PIXMA MG5200 series User Manual - Dutch - 1084 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info