542908
453
Zoom out
Zoom in
Previous page
1/468
Next page
Advanced Guide
>
About Network Communication
>
Troubleshooting
> Cannot Communicate With the Printer/Cannot Print
from the Printer
Cannot Communicate With the Printer/Cannot Print from the
Printer
Cannot Communicate with the Printer After the Network Settings Are Changed
Cannot Communicate with the Printer with USB Connection
Cannot Communicate with the Printer over the Network
The Printer Cannot Be Detected in the Network
Cannot Communicate with the Printer After the Network Settings Are Changed
Wait until the IP address is assigned to the computer. You may need to restart your computer.
Search for the printer again after confirming a valid IP address is assigned to the computer.
Cannot Communicate with the Printer with USB Connection
Check 1: Make sure that the printer is turned on.
Check 2: Make sure that the USB cable is connected properly.
Refer to the setup manual of the printer to connect the USB cable properly.
Check 3: Do not start up the Canon IJ Network Tool while printing.
Check 4: Do not print while the Canon IJ Network Tool is running.
Check 5: Make sure that Enable bidirectional support is selected in the Ports
sheet of the properties dialog box of the printer driver.
Opening the Printer Properties Dialog Box (Windows)
Cannot Communicate with the Printer over the Network
Check 1: Make sure that the printer is turned on.
Check 2: Make sure that the LAN cable is connected properly.
Check 3: Make sure that the network settings of the computer are correct.
For the procedures to connect a network device to the computer and set them up, refer to the
manual of your network device or contact its manufacturer.
Check 4: Make sure that the firewall of the security software is disabled.
If the firewall function of your security software is turned on, a message may appear warning
that Canon software is attempting to access the network. If the warning message appears,
set the security software to always allow access.
If using any programs that switch the network environment, check their settings. Some
programs will enable a firewall by default.
Check 5: When using a router, connect the printer and computer to the LAN side
(same network segment).
The Printer Cannot Be Detected in the Network
Check 1: Make sure that the printer is turned on.
Page 453 of 468 pagesCannot Communicate With the Printer/Cannot Print from the Printer
453


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon PIXMA iX7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon PIXMA iX7000 in the language / languages: English as an attachment in your email.

The manual is 9,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon PIXMA iX7000

Canon PIXMA iX7000 User Manual - German - 493 pages

Canon PIXMA iX7000 User Manual - Dutch - 486 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info