536758
165
Zoom out
Zoom in
Previous page
1/208
Next page
An Error Message is Displayed on the Screen
Error Writing/Output to USBnnn or MPUSBPRNnn
Have you replaced an ink tank with a new one? is Displayed
Low Ink Warning Displays Ink Tank with '?'
Other Error Messages
Error Writing/Output to USBnnn or MPUSBPRNnn
Ensure that the printer is turned on.
If the POWER lamp is off, turn the printer on.
When the POWER lamp is flashing green, the printer is initializing. Wait until the POWER lamp stops
flashing.
Ensure that paper is loaded.
There is a possibility that the "No paper" error has not been reset.
Load paper and press the RESUME /CANCEL button.
Ensure that the printer port setting corresponds to the printer interface connection.
(1) Open the Printer Properties dialog box.
See Opening the Printer Properties Dialog Box Directly from the Start Menu
(2) Click the Ports tab (or Details tab), and then select MPUSBPRNnn (Canon iP90) or USBnnn
(Canon iP90) ("n" represents a number) in the Print to the following port.
Ensure that the printer is securely connected to the computer.
Note If you are using a switch box or other devices, remove and reconnect the printer directly to
the computer and try printing again.
If printing is now successful, there may be a problem with the device.
Also there could be a problem with the cable(s). Replace the cable(s) and try printing
again.
Verify the printer port status.
(1) Right-click My Computer and select Properties.
(2) Click the Hardware tab, Device Manager , and double-click Universal serial bus controller , USB
Printing Support.
In Windows Me or Windows 98, click Universal serial bus controller on the Device Manager tab, and
then double-click Canon iP90.
(3) On the General tab, ensure that there is any indication of a problem with the device.
If spooling action is abnormal, disable it to send the print data directly to the printer
and try printing again. (In Windows Me or Windows 98)
(1) Open the Printer Properties dialog box.
165


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma iP90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma iP90 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info