536758
72
Zoom out
Zoom in
Previous page
1/208
Next page
Cannot Print Properly through Infrared Communication
The required driver is not installed
The installation place of the printer is not proper
During infrared communication, infrared rays were interrupted or another infrared communication unit is
operating nearby
The requirements for infrared communications with the computer or other devices are not satisfied
The infrared communication driver is inactive
The printer port status is wrong (In Windows Me or Windows 98)
The printer port setting is wrong
The required driver is not installed
Check whether the driver meeting the following requirements is installed.
Windows 98 or later must be preinstalled and Microsoft Infrared Communication Driver must be installed in
the computer.
For details on Microsoft Infrared Communication Driver, refer to your computer's operation manual.
For details on the requirements for infrared communication, refer to the Quick Start Guide.
The installation place of the printer is not proper
Check whether the printer is installed in an appropriate place.
Place the printer at a proper distance from the computer, PDA (Personal Digital Assistants) or a mobile
phone, oppose their infrared ports at a proper angle, remove obstacles between them if they exist, and retry
printing. The allowable distance and angle for infrared communication depends on the functions of the
computer, PDA or mobile phone and the environmental conditions. Place the printer at a distance of 31.5
inch/80 cm or shorter from the computer or PDA and adjust the infrared port angle properly. When printing
from a mobile phone, place it at a distance of 7.9 inch/20 cm or shorter.
For how to print through infrared communication, refer to the Quick Start Guide.
Check whether iP90 is detected by the computer.
In Windows XP, Windows 2000, or Windows Me
(1) Check whether the Wireless Link icon is displayed on the task bar.
If not displayed, iP90 is not detected by the computer.
Ensure that the printer is turned on. Bring the printer and computer closer to each other in such a manner
that their infrared ports are opposed properly.
(2) Place the mouse cursor on the Wireless Link icon.
Ensure that "iP90 is in range" is displayed.
If the name of another unit is displayed, change the orientation of this unit or turn it off.
In Windows 98
(1) Click Start and select Settings and Control Panel.
(2) Double-click the Infrared icon.
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma iP90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma iP90 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info