583171
55
Zoom out
Zoom in
Previous page
1/60
Next page
51
*1
To resume printing, you can press the OK
OKOK
OK button on the printer instead of selecting Continue
ContinueContinue
Continue.
*2
The waste ink absorber absorbs ink used during cleaning, for example. If this message
appears, you will need to call for servicing to replace the absorber and to check the printer for
proper operation.
No ink Possible causes are as follows:
•The ink has run out.
Replace the FINE Cartridge, and close the front cover.
If lines are misaligned or the resulting output is not satisfactory, carry out the print head
alignment.
If printing is in progress and you want to continue printing, press the OK
OKOK
OK button on the
printer. Then printing can continue under the ink out condition with the FINE Cartridge
installed. Replace the empty FINE Cartridge immediately after the printing. The resulting
print quality is not satisfactory, if printing is continued under the ink out condition.
Some FINE Cartridges are not installed in place. Install the FINE Cartridges in the
appropriate positions.
The FINE Cartridge may not be the compatible with this printer. Install the appropriate FINE
Cartridge. If lines are misaligned or the resulting output is not satisfactory, carry out the print
head alignment.
This FINE Cartridge has previously been used.
Ink may have run out.
The function for detecting the remaining ink level will be disabled since the remaining ink
level cannot be correctly detected. If you want to continue printing without this function,
press the OK
OKOK
OK button.
Canon recommends to use new genuine Canon cartridges in order to obtain optimum
qualities.
Printer error An error requiring servicing might have occurred. (Printer POWER
POWERPOWER
POWER lamp and Alarm
AlarmAlarm
Alarm lamp flash
alternately.)
Disconnect the cable between the printer and the camera. Turn off the printer and unplug the
power cord of the printer from the power supply. After a while, plug the power cord of the
printer back in, turn on the printer, and then reconnect the camera to the printer.
If the same problem occurs, contact the Customer Care Center.
Hardware Error/No ink FINE Cartridge errors have occurred. Replace the FINE Cartridge.
See “Replacing a FINE Cartridge” on page 40.
Error message on
camera
Try This
PIXMA_iP6210D_DPG_US.book Page 51 Thursday, June 9, 2005 4:05 PM
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma iP6220D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma iP6220D in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Pixma iP6220D

Canon Pixma iP6220D Installation Guide - English - 2 pages

Canon Pixma iP6220D Quick start guide - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info