447895
74
Zoom out
Zoom in
Previous page
1/102
Next page
70 Troubleshooting
Paper Does Not Feed Properly
Unnecessary print jobs are left in
queue. / Computer problems.
Restarting your computer may solve the problem.
If there are any unnecessary print jobs, follow the procedure below to delete
them.
(1)Open the printer properties dialog box.
Refer to “Opening the Printer Properties Dialog Box Directly from the Start
Menu” in “Opening the Printer Properties Dialog Box (Windows)” of the
User’s Guide on-screen manual.
(2)Click the Maintenance tab and then View Printer Status.
(3)Click Display Print Queue.
(4)Select Cancel All Documents (
Purge Print Documents in Windows Me or
Windows 98) on the Printer menu.
You may not be able to select individual print jobs in Windows XP or
Windows 2000.
(5)When the confirmation message is displayed, click Yes.
The print jobs are deleted.
(1)Click the printer icon in the Dock to display the list of print jobs in progress.
In Mac
®
OS X v.10.2.8, click the printer icon in the Dock to start up the Print
Center and double-click the name of your printer in the Printer List.
(2)Select the print job to delete and click .
The print jobs are deleted.
Cause Action
Printing on inappropriate type of paper. Check to see if the paper you are printing on is not too thick or curled.
See “Media Types You Cannot Use” on page 5.
Paper Feed Rollers are dirty. Follow the procedure below to clean the Paper Feed Rollers.
Cleaning the Paper Feed Rollers will wear the rollers, so perform this procedure
only when necessary.
(1)Make sure that the printer is turned on, and then remove any paper from the
Auto Sheet Feeder and Cassette.
(2)Press the Open Button to open the Paper Output Tray and extend the Output
Tray Extension.
(3)Press the Paper Feed Switch to select the paper source to clean.
(4)Hold down the RESUME/CANCEL button and release it when the POWER
lamp flashes green three times.
The Paper Feed Roller will rotate as it is cleaned.
(5)Repeat step 4 twice.
(6)Load three or more sheets of A4 or Letter-sized plain paper in portrait
orientation in the paper source you selected in step 3.
(7)Hold down the RESUME/CANCEL button and release it when the POWER
lamp flashes green three times.
The paper cleans the Paper Feed Rollers as it feeds through the printer.
(8)Repeat step 7 three times.
If there are no signs of improvement after cleaning the rollers three times,
contact a Canon service representative.
Cause Action
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma ip4300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma ip4300 in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info