683164
278
Zoom out
Zoom in
Previous page
1/326
Next page
Make sure that a port named "USBnnn" (where "n" is a number) with "Canon XXX" appearing in the
Printer column is selected for Print to the following port(s).
If the setting is incorrect:
Reinstall the printer driver with the Setup CD-ROM or install it from our website.
Printing does not start even though the printer is connected to the computer using a USB cable and
the port named "USBnnn" is selected:
In Windows 8, select My Printer on the Start screen to start My Printer. If My Printer is not
displayed on the Start screen, select the Search charm, then search for "My Printer".
Set the correct printer port on Diagnose and Repair Printer. Follow the on-screen instructions to
set the correct printer port, then select your printer's name.
In Windows 7, Windows Vista, or Windows XP, click Start and select All programs, Canon
Utilities, Canon My Printer, Canon My Printer, then select Diagnose and Repair Printer. Follow
the on-screen instructions to set the correct printer port, then select your printer's name.
If the problem is not resolved, reinstall the printer driver with the Setup CD-ROM or install it from our
website.
Check3
Make sure that the USB cable is securely plugged in to the printer and the
computer.
When the printer is connected to your computer with a USB cable, check the followings:
If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the
computer, and try printing again. If printing starts normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.
There could also be a problem with the USB cable. Replace the USB cable and try printing again.
Check4
Make sure that the printer driver is installed correctly.
Uninstall the printer driver following the procedure described in Deleting the Unnecessary Printer Driver, then
reinstall the printer driver with the Setup CD-ROM or reinstall it from our website.
Check5
Check the status of the device on your computer.
Follow the procedure below to check the status of the device.
1.
Open the Device Manager on your computer as shown below.
If the User Account Control screen is displayed, follow the on-screen instructions.
In Windows 8, select Control Panel from the Settings charm on Desktop > Hardware and Sound
> Device Manager.
In Windows 7 or Windows Vista, click Control Panel, Hardware and Sound, then Device Manager.
In Windows XP, click Control Panel, Performance and Maintenance, System, then click Device
Manager on the Hardware sheet.
2. Double-click Universal Serial Bus controllers then USB Printing Support.
If the USB Printing Support Properties screen is not displayed, make sure that the printer is correctly
connected to the computer.
Make sure that the USB cable is securely plugged in to the printer and the computer.
3. Click the General tab and make sure that there is no indication of a problem with the device.
If a device error is displayed, refer to Windows help to resolve the error.
278
278


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma iP2840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma iP2840 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Pixma iP2840

Canon Pixma iP2840 User Manual - Dutch - 344 pages

Canon Pixma iP2840 Quick start guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info