650582
2
Zoom out
Zoom in
Previous page
1/2
Next page
5
2
1
Windows PC
1
2
3
4
b
a
3
a
b
b
Mac OS
a
Windows
b
a
4
Parte posterior
Parpadeo único
9 veces
No se han retirado los materiales de protección. Pulse el botón
ACTIVADO (ON) para apagar la impresora y, a continuación, vuelva a
realizar los pasos desde
- .
4 veces
Compruebe que los cartuchos están instalados correctamente y los
botones de unión están pulsados. Consulte
.
Si la luz de Alarma (Alarm) está parpadeando:
5 veces
No hay cartuchos instalados. Consulte .
Encendida
Parpadeando
Parpadeando
Para conectar la impresora a un PC
Utilice el CD-ROM de instalación para ejecutar el archivo de conguración.
Conguración
También puede descargar el archivo de conguración desde el sitio web.
Conguración
Descargue el archivo de instalación del sitio web.
Utilice la impresora sin conectar ningún otro dispositivo
Siga las instrucciones que aparecen en la pantalla para realizar las conexiones e
instalar el software.
Encendida
Espere aproximadamente 6 minutos hasta que la luz de ACTIVADO (ON) esté encendida.
Cuando la luz de ACTIVADO (ON) esté encendida, se habrá completado la conguración de la impresora.
Carga de papel
Inserte varias hojas de papel normal A4 con la cara de impresión
hacia arriba hasta que se detenga.
También se puede cargar papel tamaño Carta.
Se puede acceder al Manual en línea desde el sitio web.
Encienda la impresora y compruebe que el parpadeo de la luz
ACTIVADO (ON) cambia a un doble parpadeo.
Parpadeo doble
Inicie la impresora.
Mantenga pulsado el botón Parar (Stop) hasta que la luz ACTIVADO
(ON) parpadee de nuevo y después suelte el botón.
El inicio tarda unos 6 minutos.
Continúe con
y consulte o en función de como vaya a usar la
impresora.
Mantener pulsado
Suelte el botón después de que
la luz ACTIVADO (ON) parpadee.
Parte traseira
Piscar uma vez
9 vezes
Os materiais de proteção não foram removidos. Pressione o botão
ATIVADO (ON) para DESATIVAR a impressora e então refaça a partir de
- .
4 vezes
Verique se os cartuchos estão corretamente instalados e se os botões
acoplados estão pressionados. Consulte
.
Se o indicador luminoso Alarme (Alarm) estiver piscando:
5 vezes
Nenhum cartucho instalado. Consulte .
Aceso
Piscando
Piscando
Para conectar a impressora a um PC
Use o CD-ROM de instalação para executar o arquivo de conguração.
Conguração
Também é possível fazer download do arquivo de conguração no site.
Conguração
Faça download do arquivo de conguração do site.
Use a impressora sem conectar qualquer outro dispositivo
Siga as instruções na tela para fazer conexões e instalar o software.
Aceso
Aguarde cerca de 6 minutos até que o indicador luminoso ATIVADO (ON) acenda.
Quando o indicador luminoso ATIVADO (ON) acender, a conguração da impressora estará concluída.
Colocando papel
Insira várias folhas de papel comum A4 com o lado de impressão
voltado para cima até parar.
Também é possível colocar papel tamanho Letter.
O Manual On-line pode ser acessado do site.
Ligue a impressora e verique se o pisca do indicador luminoso
ATIVADO (ON) agora passou a piscar duas vezes.
Piscar duas vezes
Inicialize a impressora.
Mantenha pressionado o botão Parar (Stop) até o indicador luminoso
ATIVADO (ON) piscar novamente e libere o botão.
A inicialização leva cerca de 6 minutos.
Prossiga para a etapa
e consulte ou , dependendo de como você
usará a impressora.
Manter pressionado
Libere depois que o indicador
luminoso ATIVADO (ON) piscar.
Arrière
Simple clignotement
Si le voyant Alarme (Alarm) est clignotant :
9 fois
4 fois
Les matériaux protecteurs ne sont pas retirés. Appuyez sur le bouton
MARCHE (ON) pour mettre l'imprimante hors tension, puis recommencez
à partir de l'étape
- .
Vériez que les cartouches sont correctement installées et que les
boutons mixtes sont enfoncés. Reportez-vous à l'étape
.
5 fois
Aucune cartouche n'est installée. Reportez-vous à l'étape .
Allumé
Clignotant
Clignotant
Pour connecter l'imprimante à un PC
Utilisez le CD-ROM d'installation pour exécuter le chier d'installation.
Conguration
Vous pouvez également télécharger le chier de conguration depuis le site Web.
Conguration
Téléchargez le chier de conguration depuis le site Web.
Utiliser l'imprimante sans connecter aucun autre périphérique
Suivez les instructions à l'écran pour procéder aux connexions et installer le logiciel.
Allumé
Attendez environ 6 minutes que le voyant MARCHE (ON) soit allumé.
Lorsque le voyant MARCHE (ON) est allumé, la conguration de l'imprimante est terminée.
Chargement du papier
Insérez plusieurs feuilles de papier ordinaire A4, face à imprimer
vers le haut, jusqu'à ce qu'elles soient correctement en place.
Du papier au format Lettre peut également être chargé.
Le Manuel en ligne est accessible à partir du site Web.
Mettez l'imprimante sous tension et vériez que le clignotement du voyant
MARCHE (ON) est devenu un double clignotement.
Double clignotement
Initialisez l'imprimante.
Maintenez le bouton Arrêt (Stop) enfoncé jusqu'à ce que le témoin
MARCHE (ON) clignote à nouveau, puis relâchez-le.
L'initialisation nécessite environ 6 minutes.
Passez à la section
et reportez-vous à l'étape ou selon la manière
dont vous utiliserez l'imprimante.
Maintenez enfoncé
Relâchez une fois que le
voyant MARCHE (ON) clignote.
Back
Single ash
Double ash
If the Alarm lamp is flashing:
9 times
4 times
The protective materials are not removed. Press the ON button to turn
OFF the printer, and then redo from
- .
Check that the cartridges are installed correctly and the joint buttons are
pushed in. Refer to
.
5 times
No cartridges are installed. Refer to .
Lit
Flashing
Flashing
To connect the printer to a PC
Use the setup CD-ROM to execute the setup le.
Setup
You can also download the setup le from the website.
Setup
Download the setup le from the website.
Use the printer without connecting any other devices
Follow the on-screen instructions to make connections and install software.
Lit
Wait about 6 minutes until the ON lamp is lit.
When the ON lamp is lit, the printer setup is complete.
Loading Paper
Insert several sheets of A4 plain paper with the print side facing up
until it stops.
Letter size paper can also be loaded.
The Online Manual is accessible from the website.
Turn on the printer and check that the ashing of the ON lamp has changed to
a double ash.
Initialize the printer.
Hold down the Stop button until the ON lamp ashes again, and then
release the button.
Initialization takes about 6 minutes.
Proceed to
and refer to either or depending on how you will use
the printer.
Hold down
Release after the ON
lamp ashes.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Pixma G2000 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Pixma G2000 series in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Pixma G2000 series

Canon Pixma G2000 series User Manual - English - 611 pages

Canon Pixma G2000 series User Manual - German - 646 pages

Canon Pixma G2000 series Quick start guide - German - 2 pages

Canon Pixma G2000 series User Manual - Dutch - 645 pages

Canon Pixma G2000 series Quick start guide - Dutch, Italian - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info