291205
98
Zoom out
Zoom in
Previous page
1/163
Next page
98
Connection to a computer or PictBridge compliant printer will not work when
the memory card contains more than 1800 images. For best performance, we
recommend not recording more than 100 images on the memory card when
you plan to connect the camcorder to a computer or printer.
When the subject is too bright, the ND filter turns on automatically (“ND”
appears on the screen). If it is still too bright, “OVEREXP” starts flashing. In
such case, use the optional FS-30.5U ND filter. If you wish to turn off the ND
filter: Open the menu and select [CAMERA SETUP]. Select [ND], set it to [OFF]
and close the menu.
When the Focus-Priority mode is set to [ON]:
When you press the PHOTO button fully before F and focusing frame turn
green, it may take up to 2* seconds until focus is adjusted and the still image
can be recorded to the memory card.
* Up to 4 seconds in the Low Light and the night modes.
If the subject is not suitable for autofocus, the focusing frame turns yellow and
locks the focus. Adjust the focus manually with the SET dial.
When the Focus-Priority mode is set to [OFF]:
No focusing frame appears.
In step 2, F turns green, and focus and exposure are locked.
The camcorder shuts off when you do not operate it for 5 minutes to save
power. “ AUTO POWER OFF” appears 20 seconds before shutoff. To
continue recording, turn the POWER switch to OFF and then back to CAMERA.
Recording a Still Image on a Memory Card While Recording
Movies on a Tape
When you are recording a movie on a tape, you can record the same picture as a still
image on the memory card. Select the image quality from normal or fine.
1. Open the menu and select [CAMERA SETUP]. Select [STILL I. REC], set it
to [ FINE] or [ NORMAL] and close the menu.
2. While you are recording a movie, press the PHOTO button.
The size of the still image will be 640 × 480.
The quality of the still image is slightly lower than a still image recorded in
CARD CAMERA mode.
The still image cannot be recorded on a memory card when a fader, effect or
the multi-image screen is activated.
The still image cannot be recorded on a memory card when the 16:9 format is
selected.
|
” appears when you press the PHOTO button when [STILL I. REC] is set
to [OFF].
CARD PLAY
CARD CAMERA
PLAY (VCR)
CAMERA
STILL I. REC•OFFCAMERA SETUP
( 35)
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon mvx30i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon mvx30i in the language / languages: English as an attachment in your email.

The manual is 4,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon mvx30i

Canon mvx30i User Manual - Dutch - 163 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info