Manual Canon MF4450 Image Class (page 108 of 164) (English)

467374

108

Zoom out

Zoom in

1/164

6-24

Using the Fax Functions

5 Press [ ] or [ ] to select <TX Start Speed>, and

then press [OK].

Fax Settings

TX Start Speed

RX Start Speed

6 Press [ ] or [ ] to select the send start speed,

and then press [OK].

TX Start Speed

33600 bps

14400 bps

9600 bps

7200 bps

* When <Apply> appears in the screen, you must select <Apply>

and press [OK] after specifying the setting.

7 Press [ ] (Menu) to close the menu

screen.

The setting is complete.

Setting Items

The following system management settings are available.

System Settings

Communications

Settings

Fax Settings

“TX Start Speed” (→P.6-24)

“RX Start Speed” (→P.6-24)

“Memory Lock Settings” (→P. 6-24)

“Select Country/Region” (→P.6-24)

Restrict Sending

“Address Book PIN” (→P.6-25)

“Restrict New Destinations” (→P.6-25)

“Allow Driver Faxing” (→P.6-25)

“Restrict Sending From History” (→P.6-25)

“Fax No. Confirmation Re-Entry” (→P.6-25)

“Restrict Sequential Broadcast” (→P.6-25)

TX Start Speed

Change the transmission start speed if you have difficulty

starting a fax transmission.

How to display the settings

[ ] (Menu) → <System Management Settings>

→ <Communication Management Settings> → <Fax

Settings> → <TX Start Speed>

Settings

(Bold: Default settings)

33600 bps, 14400 bps, 9600 bps, 7200 bps, 4800 bps, 2400 bps

RX Start Speed

Specify the receive start speed if you have difficulty

receiving faxes.

How to display the settings

[ ] (Menu) → <System Management Settings>

→ <Communication Management Settings> → <Fax

Settings> → <RX Start Speed>

Settings

(Bold: Default settings)

33600 bps, 14400 bps, 9600 bps, 7200 bps, 4800 bps, 2400 bps

Memory Lock Settings

Normally, received documents are immediately printed.

However, you can specify whether or not to store received

faxes in memory before printing. You can then print the

stored faxes at any time or delete them without printing to

save paper.

How to display the settings

[ ] (Menu) → <System Management Settings> →

<Communication Management Settings> → <Memory

Lock Settings>

Settings

(Bold: Default settings)

Off Does not use the Memory Lock mode.

Memory

Lock PIN:

Seven-digit

number

If you set a PIN, it will be necessary to

enter the PIN whenever you want to

change the Memory Lock mode settings,

or cancel the Memory Lock mode.

Print Report:

Off, On

You can specify whether or not to print

the receive results when receiving a fax.

To use this feature, you must also

activate the “Receive Results” feature.

Memory

Lock Time:

Off, On

If you specify <On>, documents are

received in the memory only within a

specified time.

Enter <Memory Lock Start Time> and

<Memory Lock End Time> respectively.

NOTE

Memory Lock PIN

• If you do not want to set the PIN, press [OK] without entering

any numbers.

• You cannot register consecutive digits that consist of only “0” as a

PIN, such as <0000000>.

• If you register a number that starts from <0>, the PIN changes

as follows.

Example: When you enter <02> or <002>, the PIN is specified as

<0000002>.

Select Country/Region

Specify the country or region where the machine is to be

used.

IMPORTANT

After configuration

Restart the machine to activate the settings.

How to display the settings

[ ] (Menu) → <System Management Settings> →

Settings

(Bold: Default settings)

UnitedStates (US), Canada (CA),

Brazil (BR), Mexico (MX), Other

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Canon MF4450 Image Class in the language / languages: English as an attachment in your email.

The manual is 7,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Canon MF4450 Image Class Manual

Product: