682298
11
Zoom out
Zoom in
Previous page
1/308
Next page
11
En
Specifying the Initial Settings
The  rst time you turn on the power, follow the instructions
on the screen. For details on navigating the menu and how to
input the numbers, see “Navigating the Menu and Text Input
Method” ( P.10).
Complete settings starting with language
and through to date and time
Follow the instructions on the screen, set the language,
region, time zone*, and date and time*.
* MF244dw/MF232w Only
MF244dw/MF232w
Language
Czech
Danish
Dutch
English
Current Time Set.
08/08 2014 12:52 AM
(0:00-12:59)
MF231
Language
Czech
Danish
Dutch
English
Check that paper is
loaded in Drawer 1.
Previous Next
Setting a Remote UI PIN (MF244dw/MF232w
Only)
You can set a PIN for access to the Remote UI. Protect the
machine from unauthorized access by only allowing users
with access privileges to use the machine.
To specify settings later, please refer to “Setting a Remote UI
PIN” in the User’s Guide.
Users Guide “Setting a Remote UI PIN”
Set Remote UI Access
PIN? (Settings can
be configured later)
Yes No
Remote UI Access PIN
<Apply>
Choosing the Method to Connect the
Machine
Connecting via a Wired LAN (MF244dw/
MF232w Only)
You can connect the machine to a wired router. Use the LAN
cables to connect the machine to the wired router (access
point).
Connect the computer to the router by cable or wirelessly.
Make sure that there is an available port in the router to connect
the machine and the computer.
Have a LAN Cable of Category 5 twisted-pair cable or higher ready.
Connecting via a USB cable
You can connect the machine to the computer using a USB
cable.
Make sure that the USB cable you use has the following
mark.
Connecting via a Wireless LAN (MF244dw/
MF232w Only)
You can connect the machine to a wireless router*. Since it
is wirelessly connected, no LAN cables are needed.
* A wireless router (access point) that supports IEEE802.11b/g/n is
required.
Connect the computer to the router by cable or wirelessly.
If you do not sure whether your router is wireless or
wired:
See the instruction manual provided with your network
device, or contact the manufacturer.
Direct Connection (MF244dw/MF232w Only)
Connect a mobile device to the machine wirelessly and
directly without routing through a wireless LAN router (or
access point).
Users Guide “Can Be Used Conveniently with a Mobile
Device” “Make Direct Connection (Access Point Mode)”
Choosing the Method to Connect:
Via Wireless LAN or Other Method
MF244dw/MF232w
Use wireless LAN to
connect to network?
(Can config. later.)
Yes No
Current Time Set.
Must rechg. battery
for 24 hours to save
time settings. After
turning main power
Yes
Connect to the computer via a wireless LAN
immediately
Start from step 4 of “Setting Wireless LAN” in the
Wireless LAN Setting Guide.
No
Connect to the computer via a wired LAN
Proceed to “Connecting via a Wired LAN (MF244dw/
MF232w Only)”
(P.12).
Connect to the computer via a USB cable
Proceed to “Connecting via a USB Cable (P.12).
MF231
Connect to the computer via a USB cable
Proceed to “Connecting via a USB Cable (P.12).
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon MF231 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon MF231 in the language / languages: All languages as an attachment in your email.

The manual is 15,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon MF231

Canon MF231 User Manual - English - 479 pages

Canon MF231 User Manual - German - 488 pages

Canon MF231 User Manual - Dutch - 488 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info