670856
59
Zoom out
Zoom in
Previous page
1/80
Next page
Synchronizing with an External Device
59
Synchronizing with an External Device
Using Genlock synchronization, you can synchronize this camera’s video signal to that of an external
video device. When a reference sync signal (analog blackburst or tri-level HD signal) is input through
the GENLOCK terminal, the phases of the camera’s V and H sync will automatically be synchronized
to it. The phase difference between the external Genlock signal and the camera is initially set to 0. The
H phase can be adjusted within the range of approximately ±0.4 H (–1023 to 1023).
1 Open the [Genlock Adjustment] submenu.
[Other Functions] > [Genlock Adjustment]
2 Push the joystick up/down to select the value of the
first field and then press SET to move to the next field.
Change the rest of the fields in the same way to select the
desired adjustment level (–1023 to 1023).
3 Select [Set] and then press SET.
NOTES
When a suitable Genlock signal is input, the Genlock synchronization stabilizes within approximately
10 seconds.
When a suitable Genlock signal is detected, [Gen.] will flash on the upper right of the screen. When
the camera locks on the external Genlock signal, [Gen.] will stop flashing and stay on.
If the external Genlock signal is incorrect, the synchronization may not be stable.
Reference sync signal
BNC cable (commercially available)
[Other Functions]
[Genlock Adjustment]
[000]
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon ME200S-SH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon ME200S-SH in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info