670856

Canon ME200S-SH Manual

44
Zoom out
Zoom in
Previous page
1/80
Next page
Adjusting the Focus
44
Focus Limit: Setting the Distance Range for Autofocus
You can set a "focus limit" range for the attached lens, which will cause the camera to try to autofocus
(with one-shot AF) on subjects only within that range, thereby possibly reducing autofocusing time.
You can set the far end and near end of the range, as necessary, by selecting a desired focus position.
1 Set the focus mode switch on the lens to AF.
• On a compatible CINE-SERVO lens (A 71), set the focus
operation change-over knob to SERVO.
2 Open the [Activate] submenu to activate the focus
limit.
[Camera Setup] > [Focus Limit] > [Activate]
3 Select [On] and then press SET.
To set the far end of the range
4 Adjust the focus to the desired position for the far end
of the range.
5 Open the [Far] focus limit submenu.
[Camera Setup] > [Focus Limit] > [Far]
• When a focus limit has not been set, [Limit Off] will appear
on the [Focus Limit] submenu screen. When it has been
set, [Limit On] will appear.
6 Select [Set] and then press SET.
• Select [Reset] instead to clear the focus position currently set for the far end.
• Select [Cancel] instead to cancel the operation.
To set the near end of the range
4 Adjust the focus to the desired position for the near end of the range.
5 Open the [Near] focus limit submenu.
[Camera Setup] > [Focus Limit] > [Near]
• When a focus limit has not been set, [Limit Off] will appear on the [Focus Limit] submenu screen.
When it has been set, [Limit On] will appear.
6 Select [Set] and then press SET.
• Select [Reset] instead to clear the focus position currently set for the near end.
• Select [Cancel] instead to cancel the operation.
NOTES
• If the limits for the near end and far end conflict, the one most recently set will take precedence and
the other will be cleared. For example, if you set a limit for the far end and then you set one for the
near end that is further, the limit for the far end will be cleared.
• When you activate one-shot AF after setting a focus limit, if no subject can be focused on within the
range, the focus will return close to the position where it was prior to activating one-shot AF.
• If you operate the zoom after setting a focus limit, the position of the focus limit will change. Set the
focus limit again.
[Camera Setup]
[Focus Limit]
[Activate]
[Off]
[Camera Setup]
[Focus Limit]
[Far] ..... [Limit Off]
[Near] ..... [Limit Off]
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon ME200S-SH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon ME200S-SH in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info