670856
33
Zoom out
Zoom in
Previous page
1/80
Next page
Adjusting the Aperture
33
Adjusting the Aperture
When the camera mode is set to [Manual], the camera offers the following two ways to adjust the
aperture but available aperture values will vary depending on the lens attached.
Manual aperture: Adjust the aperture value manually using the joystick.
Push Auto Iris: Momentary automatic aperture. Press a button to temporarily adjust the aperture
automatically.
The camera also allows you to compensate for the exposure obtained during automatic exposure as
well as select the light metering mode.
Manual Aperture
1 Set the camera mode to [Manual] (A 31).
On a compatible CINE-SERVO lens (A 71), set the iris
operation mode change-over switch to A.
2 Open the [Iris Increment] submenu.
[Camera Setup] > [Iris Increment]
3 Select [1/2 stop], [1/3 stop] or [Fine] (fine adjustment)
and then press SET.
4 Close the menu and then press SET.
One of the adjustable settings will be highlighted in orange on the screen.
5 Push the joystick left/right to select the current aperture value.
6 Push the joystick up/down to select the desired value and then press SET.
When [Iris Increment] is set to [Fine], the actual increments will be smaller than 1/3 stop but the
onscreen display will show the closest 1/3-stop aperture value.
NOTES
When using a compatible CINE-SERVO lens (A 71)
- As you close down the aperture, the aperture value will be displayed in gray (when the iris is
almost fully closed) and then will change to [Clsd] (in white). Still, the iris may not be fully closed
even when the onscreen display appears as [Clsd].
- When you change the aperture value from a position of fully open or fully closed iris, multiple
adjustment operations may be required to change the iris.
When using an EF lens that can correct the aperture value according to the position of the zoom*,
you can use the [Camera Setup] > [Zoom-Iris Correct.] setting to activate this correction.
When an optional RC-V100 Remote Controller is connected to the camera, you can adjust the
aperture with the remote controller’s IRIS dial. At default settings, turn the dial right to open up the
aperture and left to close the aperture. Refer to the instruction manual of the RC-V100 for details on
changing that setting.4
The aperture values set in the camera and displayed on the screen are approximate. Use them only
as a reference.
* Some EF lenses and CINE-SERVO lenses are not compatible with this function.
[Camera Setup]
[Iris Increment]
[1/2 stop]
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon ME200S-SH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon ME200S-SH in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info