670856
15
Zoom out
Zoom in
Previous page
1/80
Next page
Preparing the Power Supply
15
2
Preparations
Preparing the Power Supply
You can power the camera using a commercially available external power supply connected to the
DC IN 1 terminal (via a commercially available power cable with a female 4-pin XLR connector) or the
DC IN 2 terminal (via a commercially available power cable, using the supplied power connector).
For the USA and Canada only
The external power supply and power cable must conform to the following specifications and be
certified to meet safety standards set by UL, CSA or similar organization.
The power supply should also comply with IEC/UL60950-1 (SELV/LPS) standards.
External power supply (commercially available)
Power supply (output): 11 to 17 V DC
Current (output): 3 A or higher
Power cable (commercially available)
Power cable rating: 3 A or higher (current-carrying capacity) / 30 V DC (rated)
Using the DC IN 1 Terminal
Refer to the following terminal configuration when selecting a power cable.
1Set the Q switch to OFF.
2 Connect the 4-pin XLR connector to the DC IN 1
terminal.
DC IN 1 terminal configuration
Pin Signal
1 Ground
2 Unused
3 Unused
4 11 to 17 V DC
Terminal type: 4-pin XLR (male connector)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon ME200S-SH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon ME200S-SH in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info