709680
67
Zoom out
Zoom in
Previous page
1/85
Next page
67
ENGLISH
Timing of replacing the lamp
When the lamp indicator lights up red or a message appears suggesting it is time to replace the lamp,
please install a new lamp or consult your dealer. An old lamp may cause a malfunction in the projector
and in some instances the lamp may explode.
The LAMP indicator light and TEMPerature indicator light will light up if the lamp becomes too hot.
Turn the power off and let the projector cool for 45 minutes. If the Lamp or TEMPerature indicator
light still lights up after turning the power back on, please contact your dealer. See "Indicators" on
page 71 for details.
The following lamp warning displays will remind you to change the lamp.
Status Message
The lamp has been in operation for 1500 hours. Install a new lamp
for optimal performance. If the projector is normally run with
Economic selected (See "Setting Lamp Mode as Economic" on page
66), you may continue to operate the projector until the 1950 hour
lamp warning appears.
The lamp has been in operation for 1950 hours. A new lamp should
be fitted to avoid the inconvenience when the projector runs out of
lamp time.
The lamp has been in operation for 2000 hours.
It is strongly recommended that you replace the lamp at this age.
The lamp is a consumable item. The lamp brightness
diminishes with use. This is normal lamp behavior. You can
replace the lamp whenever you notice that the brightness
level has significantly diminished. If the lamp is not
replaced beforehand, it must be replaced after 2000 hours
usage.
The lamp MUST be replaced before the projector will operate
normally.
Notice
Order Replacement Lamp
Lamp>1500 Hours
OK
Notice
Replace Lamp Soon
Lamp>1950 Hours
OK
Notice
Replace Lamp Now
Lamp>2000 Hours
OK
WARNING
Out of Lamp Usage Time
Replace lamp (Refer to user manual)
Then reset lamp timer
OK
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LX-MW500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LX-MW500 in the language / languages: English as an attachment in your email.

The manual is 6,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon LX-MW500

Canon LX-MW500 User Manual - German - 92 pages

Canon LX-MW500 User Manual - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info