709680
64
Zoom out
Zoom in
Previous page
1/85
Next page
64
Maintenance
Care of the projector
Your projector needs maintenance from time to time, depending on the environmental circumstances, and
should be done by authorized service technicians only. Contact your dealer for instructions.
What you can do yourselves on a regular basis is to keep the lens clean, keep the cabinet clean, and
replace the air filter.
Never remove any parts of the projector except the lamp and air filter cover. Contact your dealer if other
parts need replacing.
Have the interior of the projector cleaned at regular intervals.
If the projector is used for a long period of time, dust could accumulate inside the projector. This could
cause a fire or malfunction. It is recommended that periodic maintenance of the projector be performed.
For details of maintenance costs, contact the Canon Customer Support Center.
Cleaning the lens
Clean the lens whenever you notice dirt or dust on the surface.
Use a canister of compressed air to remove dust.
If there is dirt or smears, use lens-cleaning paper or moisten a soft cloth with lens cleaner and gently
wipe the lens surface.
Never rub the lens with abrasive materials.
Cleaning the projector case
Before you clean the case, turn the projector off using the proper shutdown procedure as described in
"Shutting down the projector" on page 47 and unplug the power cord.
To remove dirt or dust, wipe the case with a soft, lint-free cloth.
To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral pH detergent. Then
wipe the case.
Never use wax, alcohol, benzene, thinner or other chemical detergents. These can damage the case.
Flammable substances may ignite causing fire or breakdown while the lamp is illuminating.
Replacing the air filter
Be sure to use the air filter dedicated to this projector, LX-FL02. The air filter is not bundled with the
package of the projector. Contact your dealer for purchase of the air filter.
Before you replace the air filter, turn the projector off using the proper shutdown procedure as described
in "Shutting down the projector" on page 47 and unplug the power cord.
Follow the below illustrations to replace the air filter (LX-FL02). Contact your dealer when replacing the
air filter unit with the projector mounted to the ceiling.
Setting Filter Mode as On
Set Filter Mode to On only when using the projector after the air filer is properly attached. Failing to do
so will result in a shorter lamp life.
1. Press MENU and then press / until the SYSTEM SETUP: Advanced menu is highlighted.
2. Press to highlight Filter Settings and press OK/IMAGE. The Filter Settings page is displayed.
3. Press to highlight Filter Mode and press / to select On.
1
1
1
2
2
1
2
1
2
3
4
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LX-MW500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LX-MW500 in the language / languages: English as an attachment in your email.

The manual is 6,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon LX-MW500

Canon LX-MW500 User Manual - German - 92 pages

Canon LX-MW500 User Manual - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info