709680
12
Zoom out
Zoom in
Previous page
1/85
Next page
12
Precautions for the remote control battery
Be sure to remove the power plug from the power outlet before replacing the lamp.
When the lamp is damaged, shards of glass may be scattered inside the projector. Contact the Canon
Customer Support Center for cleaning and inspection of the projector interior and lamp
replacement.
When handling the lamp, pay attention to the following points.
•Be sure not to handle the lamp immediately after it has been used. Be sure to switch off the
power and wait for approximately 45 minutes for the lamp and the projector to cool down
sufficiently. Failure to do so could result in a burn or personal injury due to heat from the
lamp or projector.
When an instruction to replace the lamp has been displayed (LAMP Indicator Displays (See
"Timing of replacing the lamp" on page 67 for details)), the possibility of the lamp breaking will
increase. Replace the lamp with a new one as soon as possible.
If the lamp is damaged, gas inside the lamp (containing mercury) and dust may be emitted from the
exhaust vents. If this happens, immediately open the windows and doors to provide ventilation to
the room. If you inhale any gas emitted from the lamp or it has come into contact with your eyes or
mouth, consult a doctor immediately.
When disposing of a used mercury lamp, dispose of it in the same way as a fluorescent lamp and in
accordance with the local regulations where you live.
Warning
Caution
Pay attention to the following points regarding handling of the battery. Failure to do so could result in a
fire or injury.
Do not place the battery in a fire or apply heat to, short circuit or disassemble the battery.
Do not attempt to recharge the battery.
Insert the battery in the correct + / – positions.
If any liquid leaks from the battery and comes into contact with skin, wash off thoroughly with
water.
Warning
Installation and Handling Precautions
Do not install the projector in a location that is damp, or where there is a lot of dust, oily smoke or
tobacco smoke. Doing so could cause contamination of optical components such as the lens and the
mirror and may result in deterioration of image quality. In addition, oil can degrade the plastic,
which could result in a ceiling-mounted projector falling from its mounting.
Do not use adhesives, lubricants, oils, or alkaline detergents for maintenance of the projector. They
could adhere to the plastic and deteriorate it, possibly resulting in the projector falling if it is ceiling-
mounted.
Make sure to implement anti-fall measures such as an anti-fa l wire when installing the projector in
high places, for example, installing it on the ceiling.
Do not use a lens cleaning paper or lens cleaner.
Before cleaning the lens, always turn the projector off and cool it down.
Warning
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LX-MW500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LX-MW500 in the language / languages: English as an attachment in your email.

The manual is 6,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon LX-MW500

Canon LX-MW500 User Manual - German - 92 pages

Canon LX-MW500 User Manual - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info