709656
34
Zoom out
Zoom in
Previous page
1/73
Next page
34 Operation
Operation
Starting up the projector
1. Plug the power cord into the projector and into a wall
socket. Turn on the wall socket switch (where fitted).
Check that the POWER indicator light on the
projector lights orange after power has been applied.
2. Press on the projector or remote control to start the projector. The power indicator
flashes green and stays green when the projector is on.
(If necessary) Rotate the focus ring to adjust the image clearness.
3. If the projector is activated for the first time, select your OSD language following the
on-screen instructions.
4. If you are prompted for a password, press the arrow keys to enter a 6-digit password. See
"Security Settings" on page 50.
5. Switch all of the connected equipment on.
6. The projector will search for input signals. The current input signal being scanned appears.
If the projector does not detect a valid signal, the message “No Signal” will continue
displaying until an input signal is found.
You can also press INPUT to select your desired input signal. See "Switching input signal"
on page 35.
• Ask your installation specialist to provide an Earth
leakage breaker. When you do not use the projector,
be sure to shut down the main power by the breaker.
• Please use the original accessories (e.g. power cord)
only with the device to avoid possible dangers such as
electric shock and fire.
• In order to ensure the safety in case of trouble with
the projector, use an electrical outlet having an earth
leakage breaker to supply the power to the projector.
If you do not have such outlet, ask your dealer to
install it.
• If the projector is still hot from previous activity, it will run the cooling fans for approximately 90
seconds before energizing the light source.
• To maintain the light source life, once you turn the projector on, wait at least 5 minutes before
turning it off.
• After POWER is pressed, the image may flicker before the light source becomes stable. This is
not a product malfunction.
If the frequency/resolution of the input signal exceeds the projector's operating range, you will see
the message “Out of Range” displayed on the background screen. Please change to an input
signal which is compatible with the projector's resolution or set the input signal to a lower setting.
See "Timing chart" on page 64.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LX-MU500Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LX-MU500Z in the language / languages: English as an attachment in your email.

The manual is 7,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon LX-MU500Z

Canon LX-MU500Z User Manual - German - 75 pages

Canon LX-MU500Z User Manual - Dutch - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info