536747
32
Zoom out
Zoom in
Previous page
1/84
Next page
32

When the image is not stable or flicker, or when the image is not in right position as inputing ANALOG
PC signal, press the AUTO SET button on the remote control unit to adjust the , ,
 and to obtain best display.



• Refer to page 76 for the Compatible Computer
Specifications.
Some signal formats may not be able to display
correctly.
Only when input computer signal to the projector, PC
will become available.
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select  and then press
the Point or the OK button.
1
2
Use the Point ▲▼ buttons to select 
PC and then press the OK button.

The adjusted parameters from the Auto PC
Adjustment can be stored in the projector. Once the
parameters are stored, the setting can be done just
by selecting a Mode (1–10) in the PC System Menu
(p.31). See also “Store” on page 34.
The Auto PC Adjustment cannot be operated when
, 575i, , , , 1035i or  is
selected in the PC System Menu (p. 31), or when
the signal is coming from the HDMI terminal.

When the image is not provided properly with Auto
PC, operate as bellows:
Use  menu to adjust the System mode to
match to the computer resolution. Refer to page
31 for details.
See operation example below.
Use  menu to adjust the System
mode manually and store the adjusted
parameters in the Custom Mode. See page 34.

Resolution :1600 x 1200, Vertical Frequency: 60 Hz
Press the MENU button to display the
On-Screen Menu. Press the Point ▲▼ buttons
to select .
1
2
Press the Point button to access to
COMPUTER and then press the OK button.
3
Confirm the System mode displayed. If the
input signal is different from the computer
signal, operate the following steps.
4
Use the Point ▲▼ buttons to select 
and and press the OK button or the Point
button.
5
Use the Point ▲▼ buttons to select the input
computer signal and press the OK button.
6
Press the MENU button to exit the
On-Screen
Menu and confirm the image.

Confirm System mode
Change System mode
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LV8227A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LV8227A in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info