536747
26
Zoom out
Zoom in
Previous page
1/84
Next page
26

Rotate the Zoom Ring to zoom in and out.
Rotate the Focus Ring to adjust the focus of the
image.

If a projected picture still has keystone distortion
after pressing the AUTO SET button on the top
control or the remote control unit, correct the
image manually as follows:
Press the KEYSTONE button on the remote
control unit. The Keystone dialog box appears.
Use the Point ▲▼ buttons to correct keystone
distortion. The keystone adjustment can be
stored (pp.38, 40, 48, 50).
Reduce the upper
width with the Point
button.
Reduce the lower
width with the Point
button.
•The white arrows indicate that there is no
correction.
•A blue arrow indicates the direction of
correction.
•An arrow disappears at the maximum
correction.
•If you press the KEYSTONE button on the
remote control unit once more while the
keystone dialog box is being displayed, the
keystone adjustment will be canceled.
•The adjustable range is limited depending on
the input signal.


LV -RC06
Auto setup function is provided to automatically execute the setting of Auto setup (includes Auto input,
Auto PC and Auto Keystone functions) in the setting menu by just pressing the AUTO SET button on
the top control or the remote control unit. Refer to page 52 for the setting of the Auto setup function.

Auto Keystone corrects vertical distortion only; it
does not correct horizontal distortion.
Auto Keystone cannot work when Ceiling feature is
set to On in the Setting menu (pp.38, 40, 48, 50).
Perfect correction of the image distortion cannot
be ensured with the Auto setup function. If the
distortion cannot be corrected properly by pressing
the AUTO SET button, adjust manually by pressing
the KEYSTONE button on the remote control unit or
selecting Keystone in the Aspect menu (pp.38, 40,
48, 50).
,  ,   and
  position of some computers
cannot be fully adjusted with the Auto PC
Adjustment function. When the image is not
provided properly with this operation, manual
adjustments are required (pp.33-34).





Zoom Ring
Focus Ring
OK
P O WER
AUTO S E T
MENU
LAMP REPLACE
WARNING
VOLVOL


26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LV8227A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LV8227A in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info