536749
57
Zoom out
Zoom in
Previous page
1/84
Next page

57


This function is available when operating the
projector via network.


 .. Supply the power to the network
function even after turning off the
projector by pressing the POWER
button on the remote control unit.
 ......... Select  when you do not use
the projector via network. The
projector’s network function will
stop when turning off the projector,
you can not turn on the projector
via network.
Refer to the user’s manual of “Network Set-up
and Operation”.

 ...... Does not restrict functionality even
in standby mode.
 ......... Restricts some functions in
standby mode to reduce power
consumption.

When selecting , the cooling fans may be
running depending on the temperature inside the
projector even if the projector is turned off.
When  is selected and the projector is in
Standby mode, the communication of RS-232C
serial port is not available.
• N is only for LV-7292A, LV-7297A,
LV-7392A, LV-8227A.
This function allows you to change the setting of
the P-timer and execute it.
Select one of the following options:
 ....... The P-timer display 
appears on the screen and the
count up starts ()
 .. The time set in the Timer setting
appears on the screen and the
countdown starts.
 ............. Use the Point ▲▼ buttons to set
the Timer ().  is
available in Count down only.
Factory default velue is 10 Min.
 ............... It executes the count up or count
down function. Press the OK
button at  and the indication
changes into Stop. To stop
 or , press
the OK button at on the
screen menu, then the indication
changes into Restart. Press the
OK button at Restart to resume
 or .
Reset ............. Reset the P-timer values.
Press the OK button at Reset to
return to the following value;
 ... "000:00"
 ... Timer that
you set
 ................ To exit the P-timer operation.

P-timer display

To stop the P-timer function, press the P-TIMER button.
To cancel the P-timer, press and hold the P-TIMER
button for a few seconds.

X: disabled O: enabled
*1 When switch the STANDBY MIC OUT function On in
Standby mode status, only MIC volume can be output.
*2  is only for LV-7292A, LV-7297A, LV-7392A,
LV-8227A.
 
Serial command X O
Network*2 X O
Audio Out X X *1
Direct power on
O O
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LV7297M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LV7297M in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info