536749
38
Zoom out
Zoom in
Previous page
1/84
Next page
38

Select . The On-Screen Menu
disappears and  appears. Press the
OK button to expand the image size. Use the
Point ▲▼◄► buttons to pan the image. The
Panning function can work only when the image
is larger than the screen size. A projected image
can be also expanded by pressing the D.ZOOM
or the OK button on the remote control unit.
To exit the Digital zoom +/– mode, press any
button except the D.ZOOM  buttons, OK and
Point buttons.

Select . The On-Screen Menu
disappears and  appears. Press the
OK button to compress image size.
The projected image can be also compressed by
pressing the D.ZOOM or the OK button on the
remote control unit.

To return to the previous screen size, select a
screen size from the Screen Size Adjustment
Menu or select an input source from the Input
Source Selection Menu (see page 30) again,
or adjust the screen size with the D.ZOOM 
buttons.

The minimum compression ratio is limited
depending on the input signal, when the Keystone
function is working or when the custom is selected
for the screen size.
True and    are disabled and
cannot be displayed when , 575i,  
,1035i or  is selected in the PC System
Menu (p.31).
 cannot be selected when True is
selected.
The minimum compression ratio is limited at
Normal screen size.
LV -RC06





When this function is set to On, the picture
will be top/bottom and left/right reversed. This
function is used to project the image from a
ceiling-mounted projector.
Ceiling
When this function is set to On, the picture will
be left/right reversed. This function is used to
project the image from rear of the screen.
Rear
To reset the adjusted data, select Reset and
press the
OK button. A confirmation box appears and then
select Yes. All adjustments will return to their
previous figures.
Reset

This function is used to adjust keystone
distortion of the projected image. Use the Point
▲▼ buttons to choose the item you want to
adjust.

To correct keystone distortion, press the OK
button.
Keystone appears on the screen. Use the
Point ▲▼ buttons to correct keystone
distortion (p.26).

To store or reset the keystone correction,
press the Point button.
 .......... Keep the keystone correction
even when the AC power cord
is plugged out or turned off the
projector.
Reset .......... Release the keystone correction
when the AC power cord is
plugged out.

Ceiling
Rear
Press the OK button.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LV7297M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LV7297M in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info