536748
52
Zoom out
Zoom in
Previous page
1/84
Next page
52


During  is in progress, If the MENU
button or the POWER button is pressed, 
 will stop. If the COMPUTER button or
VIDEO or COMPONENT or S-VIDEO or HDMI
button is pressed,  will stop and go
back to the button's input signal.
,  and  can
not be set  at the same time.
 corrects vertical distortion only,
not correct horizontal distortion.
The Auto Keystone function can not work when
the Ceiling feature is set On in the Screen menu
(pp. 38, 40, 48, 50).
Perfect correction of the image distortion can not
be ensured with the Auto setup function. If the
distortion is not corrected properly by pressing the
AUTO SET button, adjust manually by pressing
the KEYSTONE button on the remote control unit
or selecting  in the Setting menu (pp.
26, 38, 40, 48, 50).
, ,  and
  of some computers cannot
be fully adjusted with the Auto PC Adjustment
function. When the image is not provided properly
with this operation, manual adjustments are
required (pp. 33-34).


This function detects the input signal
automatically. When a signal is found, the search
will stop. Use the Point ▲▼ buttons to select
one of the following options.
 ....... Auto input does not work.
On 1..... Auto input works under the following
situation.
When pressing the AUTO SET button
on the top control or the remote
control unit.
On 2..... Auto input works under the following
situation.
When turning on the projector by
pressing the POWER button on the
top control or the remote control unit.
When pressing the AUTO SET button
on the remote control unit or the top
control.
When the current input signal is cut
off.*
* If the Blank or Freeze function is active,
cancel it to activate the Auto input. It is
also unavailable when On-Screen menu is
displayed.

On..........Enables Auto PC Adjustment when
pressing the AUTO SET button on
the remote control unit or the top
control.
...........Disables Auto PC Adjustment.


.......
Always works and corrects keystone
distortion according to the projector's
tilt.
Manual...Works only when pressing the AUTO
SET button on the top control or the
remote control unit.
.......... Disables Auto Keystone.


While  is set to On 1 or On 2, the
status of Input and Lamp are displayed every time
the signal is switched.
Only the last selected input source can be
detected.
This function enables Auto input, Auto Keystone
correction and Auto PC adjustment by pressing
the AUTO SET button on the top control or the
remote control unit. Settings for those functions
can be altered as follows:
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LV7292M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LV7292M in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info