17
Connect the projector's AC power cord into the AC outlet.
The POWER indicator blinks red in a moment and emits red
light.
Press the POWER button on the top control or on the
remote control unit. The POWER indicator turns green
lighting and the cooling fans start to operate. The
preparation display appears on the screen and the count
down starts.
2
3
1
16
The preparation display disappears after 30 seconds.
4
After the count-down, the image level that was selected last
and the Lamp mode status icon (see page 41) appear on the
screen.
(See page 41 for Lamp mode.)
Selected Image Level and Lamp Mode
Complete peripheral connections (with a computer, VCR,
etc.) before turning on the projector.
Lamp mode
What is PIN code?
PIN code is a security code using Personal Identification Number that
allows the person who knows it to operate the projector. Setting the PIN
code prevents others except the specific users from operating the
projector.
A PIN code consists of a four-digit number. Refer to the PIN code lock
function in Setting on page 43 for locking operation of the projector with
your PIN code.
Pointer
After the OK icon
disappears, you can
operate the projector.
PIN code Input Dialog Box
Tu r ning On the Projector
Basic Operation
Enter a PIN code
Select a number by pressing the Point 7 8 buttons and fix the number
with the OK button. The number will change to "✳". If you fixed an
incorrect number, move the pointer to "Set" or "Clear" once by pressing the
Point
dd
button, then return to "PIN code". Enter the correct number again.
Repeat this step to complete entering a four-digit number.
When the four-digit number is fixed, the pointer will automatically move to
"Set". Press the OK button so that you can start to operate the projector.
If you entered an incorrect PIN code, "PIN code" and the number (✳✳✳✳)
will turn red and disappear. Enter a correct PIN code all over again.
Basic Operation
✔Note:
• If the projector is locked with a PIN code, the PIN code Input Dialog Box will
appear. Enter the PIN code as instructed below.
• When the On start function is on, this projector is turned on automatically by
connecting the AC power cord to an AC outlet. (See page 41 for the On start
function.)
Image Level