475885
56
Zoom out
Zoom in
Previous page
1/81
Next page
56


This projector provides two different remote
control codes: the factory-set initial code ()
and the secondary code (). This switching
function prevents remote controller interference
when operating several projectors or video
equipment at the same time.
When operating the projector in  , both
the projector and the remote controller must be
switched to .

Select either  or  in this Setting
Menu.

Press and hold both the MENU and IMAGE
buttons together for 5 seconds or more. After
changing the code, make sure the remote
controller operates properly.

When different codes are set on the projector and on the remote controller, any operation cannot be made. In that
case, switch the code on the remote controller to fit the code on the projector.
• If the batteries are removed from the remote controller for a long period of time, the remote control code will be
reset.

This function allows you to change brightness of
the screen.


Lamp mode can not be changed for a while after turning on the projector. Lamp needs some time to stabilize after
the power is turned on. Stored lamp mode will be active after the lamp is stabilized.
If Mode 2 has been selected and the projection lamp exceeds the recommended total hours of use, the
replacement icon will be displayed at the time of power-on. Then the projector will turn off after 3 minutes.
The Lamp replacement icon will not appear when the Display function is set to  (p.48), during  (p.27), or
 (p.28).

.......
Brightness according to the input
signal.

..
Normal brightness
.....70%-80% of the normal brightness.
.....50% of the normal brightness.


Select the lamp operation when the total lighting
time of a lamp exceeds the recommended total
hours of use.
 The lamp can be turned on even
after exceeding the recommended
total hours of use.
The lamp can be turned on even
after exceeding the recommended
total hours of use. But the projector
turns off automatically after 3
minutes.


56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LV-8320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LV-8320 in the language / languages: English as an attachment in your email.

The manual is 6,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon LV-8320

Canon LV-8320 User Manual - German - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info