475898
71
Zoom out
Zoom in
Previous page
1/84
Next page
71
Maintenance and Cleaning
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
Make sure you have properly connected the projector to peripheral equipment as described on pages 18-20.
Make sure all equipment is connected to AC outlet and the power is turned on.
When the projector does not project an image from the connected computer, restart the computer.
Problem Solutions Pages
Power
No power
Plug the power cord of the projector into the AC outlet.
See if the POWER indicator lights red.
Wait until the POWER indicator stops blinking to turn on the
projector again. The projector can be turned on after the
POWER indicator turns red.
22
Check the WARNING TEMP. indicator. If the WARNING TEMP.
indicator lights red, projector can not be turned on.
66
Check the projection lamp. 69
Unlock the Key lock function for the projector. 61
PIN code dialog box appears at
start-up.
PIN code lock is being set. Enter a PIN code (the “1234” or
numbers you have set.)
23,
61-62
Opening display
The initial display is not shown.
Make sure Off or Countdown off are not chosen at display
function.
55
The initial display is not same
as the default set.
Make sure User or Off are not chosen at Logo (select)
function.
55
Input signal switches automati-
cally. (or does not switch auto-
matically)
Make sure Auto input function is adjusted properly. 53
An icon other than Input mode
or Lamp mode icon appears
That is the Filter warning icon or the Lamp replacement icon. 65, 69
Image
No image
Check the connection between your computer or video
equipment and the projector.
18-20
See if the input signal is correctly output from your computer.
Some laptop computers may need to change the setting for
monitor output when connecting to a projector. See your
computers instruction manual for the setting.
It takes about 30 seconds to display an image after turning on
the projector.
22
Check the Input signal, color system, video system or
computer system mode.
Make sure the temperature is not out of the specified
Operating Temperature (41˚F–104˚F [5˚C–40˚C]).
When Blank is operating, the image can not be displayed.
Press the BLANK button or any other button on the remote
controller.
Image is Left/Right reversed.
Check the Ceiling/Rear function. 42, 49
Image is Top/Bottom reversed.
Check the Ceiling function. 42, 49
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LV-8235UST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LV-8235UST in the language / languages: English as an attachment in your email.

The manual is 5,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info