Manual Canon LV-8225 (page 7 of 83) (English)

475884

Zoom out

Zoom in

1/83



– Remove the batteries when they have been

exhausted or not in use for an extended period of

time.

– Be sure to replace both batteries at the same

time. Do not mix batteries of different types.

– Insert batteries correctly according to the “+” and

“-“ markings.

– If a fluid from a battery leaks and comes in

contact with your skin, rinse the affected skin

thoroughly as soon as possible.

– Do not place heavy objects or step on the

projector. Be especially careful that small children

do not step on the projector. If not, the projector

may drop or break, causing injury.

– Disconnect the power cord from the power outlet

if the projector is left unused for a long period of

time. Failure to do so may result in a fire.

– Do not bring your hands to the peripheral part

of the exhaust vent on the cabinet. This area

becomes hot during use. Be especially careful

that small children do not touch the area. Failure

to do so may result in burn.

– Do not put metal objects in front of or near

the exhaust vent. They will become hot while

projector is being used.

– Do not place the projector on top of unstable or

slanted surfaces. The projector may fall down

and cause injury.

– Do not attach the lens cover while the projector

is being used or place any objects in front of the

lens. Failure to do so may result in a fire.

– A buildup of dust inside the projector can cause a

fire or damage. Consult your dealer for cleaning.

– When installing the projector to a ceiling, consult

your electrician or dealer. If the projector is not

fixed securely, accidents may result.

– Never take out the lamp soon after the projector

is used. Let the projector cool for at least 1 hour

before taking out the lamp, as burns may result.

– If the lamp replacement icon appears or the

LAMP REPLACE indicator lights orange,

immediately replace the lamp with a new one.

Otherwise, the lamp may burst.

– If the lamp burns out, the gas or dust (containing

mercury) inside the lamp may escape from the

air vents. Immediately open the windows and

ventilate the room. If you inhale the gas or the

gas gets into your eyes or mouth, see a doctor at

once.

– Dispose of a lamp containing mercury in the

same manner as fluorescent lamps according to

local regulations.

– This projector is a precision machine. Do

not subject the projector to strong shocks or

vibrations or knock it down. Remove the lens,

close the lens mounting hole with the front cover,

and retract the adjustable feet before placing the

projector into the carrying case. The projector

may be damaged if you place it in the case

without retracting the adjustable feet.

– Place the projector into the specified case

when transporting it by courier or any other

transportation service. Consult your dealer for the

case.

– Keep space of 1 m or more at the sides of the

projector between the intake/exhaust vents and

walls. Poor ventilation may cause malfunction.

– Do not install the projector in the locations

with heavy dust, high humidity, oily vapors, or

cigarette smoke.

A buildup of dust on the optical elements such as

lens or mirror may degrade image quality.

– Directly touching the lens may cause poor image

quality.

– If the projector is carried from a cold place to a

warm place or the room temperature is raised

rapidly, condensation may form on the lens and

mirror due to the moisture in the atmosphere,

resulting in a blurred picture. Wait until

condensation evaporates and normal picture is

shown.

– Do not install the projector in the locations with

great difference in temperature. Doing so may

cause malfunction. The ranges of the operating

and storage temperatures are as shown below:

Operating temperature: 41˚F–95˚F [5˚C–35˚C]

Storage temperature: 10˚F–140˚F (-10˚C–60˚C)

– Do not install the projector near high-voltage

electric power lines or power sources.

– Do not place the projector on a carpet or bed.

The internal temperature will rise, causing

malfunction.

– To avoid increase in the internal temperature, do

not block the intake/exhaust vents.

– Position the projector at a proper angle. Incorrect

positioning may cause troubles and accidents. Do

not roll the projector more than 20 degrees from

the horizontal.

– Do not place any heat-sensitive objects on the

projector.





Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Canon LV-8225 in the language / languages: English as an attachment in your email.

The manual is 6,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon LV-8225

Canon LV-8225 User Manual - German - 83 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Canon LV-8225 Manual

Product: