475900
7
Zoom out
Zoom in
Previous page
1/90
Next page
7
Remove the batteries when they have been exhausted
or not in use for an extended period of time.
Be sure to replace both batteries at the same time. Do
not mix batteries of different types.
Insert batteries correctly according to the “+” and “-“
markings.
If a fluid from a battery leaks and comes in contact
with your skin, rinse the affected skin thoroughly as
soon as possible.
CAUTION
Do not place heavy objects or step on the projector.
Be especially careful that small children do not step on
the projector. If not, the projector may drop or break,
causing injury.
Disconnect the power cord from the power outlet if
the projector is left unused for a long period of time.
Failure to do so may result in a fire.
Do not bring your hands to the peripheral part of the
exhaust vent on the cabinet. This area becomes hot
during use. Be especially careful that small children do
not touch the area. Failure to do so may result in burn.
Do not put metal objects in front of or near the
exhaust vent. They will become hot while projector is
being used.
Do not place the projector on top of unstable or
slanted surfaces. The projector may fall down and
cause injury.
Do not attach the lens cover while the projector is
being used or place any objects in front of the lens.
Failure to do so may result in a fire.
A buildup of dust inside the projector can cause a fire
or damage. Consult your dealer for cleaning.
When installing the projector to a ceiling, consult
your electrician or dealer. If the projector is not fixed
securely, accidents may result.
CAUTION
Never take out the lamp soon after the projector is
used. Let the projector cool for at least 1 hour before
taking out the lamp, as burns may result.
If the lamp replacement icon appears or the LAMP
REPLACE indicator lights orange, immediately replace
the lamp with a new one. Otherwise, the lamp may
burst.
If the lamp burns out, the gas or dust (containing
mercury) inside the lamp may escape from the air
vents. Immediately open the windows and ventilate
the room. If you inhale the gas or the gas gets into
your eyes or mouth, see a doctor at once.
Dispose of a lamp containing mercury in the same
manner as fluorescent lamps according to local
regulations.
This projector is a precision machine. Do not subject
the projector to strong shocks or vibrations or knock it
down. Remove the lens, close the lens mounting hole
with the front cover, and retract the adjustable feet
before placing the projector into the carrying case. The
projector may be damaged if you place it in the case
without retracting the adjustable feet.
Place the projector into the specified case when
transporting it by courier or any other transportation
service. Consult your dealer for the case.
Keep space of 1 m or more at the sides of the
projector between the intake/exhaust vents and walls.
Poor ventilation may cause malfunction.
Do not install the projector in the locations with heavy
dust, high humidity, oily vapors, or cigarette smoke.
A buildup of dust on the optical elements such as lens
or mirror may degrade image quality.
Directly touching the lens may cause poor image
quality.
–If the projector is carried from a cold place to a warm
place or the room temperature is raised rapidly,
condensation may form on the lens and mirror due to
the moisture in the atmosphere, resulting in a blurred
picture. Wait until condensation evaporates and
normal picture is shown.
Do not install the projector in the locations with great
difference in temperature. Doing so may cause
malfunction. The ranges of the operating and storage
temperatures are as shown below:
Operating temperature: 41˚F–104˚F (5˚C–40˚C)
Storage temperature: 10˚F–140˚F (-10˚C–60˚C)
Do not install the projector near high-voltage electric
power lines or power sources.
Do not place the projector on a carpet or bed. The
internal temperature will rise, causing malfunction.
To avoid increase in the internal temperature, do not
block the intake/exhaust vents.
– Position the projector at a proper angle. Incorrect
positioning may cause troubles and accidents. Do
not roll the projector more than 10 degrees from the
horizontal.
– Do not place any heat-sensitive objects on the
projector.
Precaution During Use
Safety Instructions
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LV-7590 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LV-7590 in the language / languages: English as an attachment in your email.

The manual is 10,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info