536745
66
Zoom out
Zoom in
Previous page
1/84
Next page
66

Filter prevents dust from accumulating on the optical elements inside the projector. Should the Filter
become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal
heat buildup and adversely affect the life of the projector. If a “Filter warning” icon appears on the
screen, replace the Filter immediately. Replace the filter by following the steps below.

- Do not operate the projector with the filter
removed. Dust may accumulate on the optical
elements degrading picture quality.
- Do not put anything into the air vents. Doing
so may result in malfunction of the projector.
- Do not wash the filter with water or any other
liquid Matter. Otherwise the filter may be
damaged.





When using the projector under dusty or
smoky conditions, dust may accumulate
on a lens, LCD panels, or optical elements
inside the projector degrading the quality of a
projected image. When the symptoms above
are noticed, contact your authorized dealer or
service center for proper cleaning.
Be sure to reset the Filter counter after cleaning
or replacing the filter.
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select Setting and then press the Point ►
or the OK button.
Use the Point ▲▼ buttons to select Filter
 and then press the Point or the
OK button. Use the Point ▲▼buttons to
select  and then press
the OK button. 
appears. Select  to continue.
1
2



appears.
Select ,
then another
confirmation box
appears.
Select  again
to reset the Filter
counter.
Another confirmation dialog box appears,
select  to reset the Filter counter.
3

Turn off the projector, and unplug the AC
power cord from the AC outlet.
Place the latch in the OPEN position and
pull out the filter in the arrow direction.
1
2
Slide the new filter (along the guide
rails. Make sure that the filter is inserted
completely.) Place the latch back in the
LOCK position.
3
4
Filter Latch
Connect the AC power cord to the
projector and turn on the projector.
5
Reset the filter counter.
OPEN
LOCK

• When replacing the
filter, it is required
a certain space to
pull out the filter
completely.
• When installing the
projector, install the
projector with keeping
a certain space for
replacing the filter.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LV-7297A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LV-7297A in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info