475882
57
Zoom out
Zoom in
Previous page
1/83
Next page

57


This function is available when operating the projector
via network.
 .... Supply the power to the network
function even after turning off the
projector by pressing the POWER
button on the remote control unit.
You can turn on/off the projector via
network, modify network environment,
and receive an e-mail about projector
status while the projector is powered
off.
 ............ Select  when you do not use the
projector via network. The projector’s
network function will stop when turning
off the projector, you can not turn on the
projector via network.
Refer to the user’s manual of “Network Set-up and
Operation”.

When selecting , the cooling
fans may be running depending on the
temperature inside the projector even if
the projector is turned off.
When  is selected and the projector is
in Standby mode, the communication of
RS-232C serial port is not available.
This function allows you to change the setting of the P-
timer and execute it.
Select one of the following options:
 ........... The P-timer display  appears
on the screen and the count up starts
()
 ...... The time set in the Timer setting
appears on the screen and the
countdown starts.
 ................. Use the Point ▲▼ buttons to set the
Timer ().  is available
in Count down only. Factory default
velue is 10 Min.
 .................. It executes the count up or count
down function. Press the OK button
at  and the indication changes
into Stop. To stop  or
, press the OK button
at on the screen menu, then
the indication changes into Restart.
Press the OK button at Restart to
resume  or .
Reset ................. Reset the P-timer values.
Press the OK button at Reset to
return to the following value;
 ... "000:00"
 ... Timer that you set
 .................... To exit the P-timer operation.

P-timer display

To stop the P-timer function, press the P-TIMER button.
To cancel the P-timer, press and hold the P-TIMER
button for a few seconds.

X: disabled O: enabled
*1 When switch the STANDBY MIC OUT function
On in Standby mode status, only MIC volume
can be output.
 
Serial command
X
O
Network X O
Monitor Out X O
Audio Out X
X *1
Direct power on O O
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LV-7295 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LV-7295 in the language / languages: English as an attachment in your email.

The manual is 6,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon LV-7295

Canon LV-7295 User Manual - German - 83 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info