Manual Canon lv 7230 (page 13 of 64) (English)

214426

Zoom out

Zoom in

1/64

Part Names and Functions

This projector has eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the other

seven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating several

projectors or video equipment at the same time. (Change the remote control code for the projector first before changing

that for the remote control unit. See “Remote control” on page 44.)

While pressing the MENU button, press the IMAGE button

number of times corresponding to each remote control code

number. Each time you press the IMAGE button, the code is

changed sequentially. (See the list below.)

To initialize the remote control code for the remote control

unit, slide the RESET/ON/ALL-OFF switch to the RESET, and

then to the ON. The initial code is Code 1.

POINTER

While pressing the MENU

button, press the IMAGE

button number of times

corresponding to the remote

control code for the projector.

Remote Control Code

Number of Times of

Pressing IMAGE Button

Code 1 1

Code 2 2

Code 3 3

Code 4 4

Code 5 5

Code 6 6

Code 7 7

Code 8 8

MENU button

IMAGE button

INPUT

WARNING

LAMP REPLACE

POWER

KEY

STONE

SET

VOL

Point the remote control unit toward the projector (Infrared

Remote Receiver) whenever pressing any button. Maximum

operating range for the remote control unit is about 16.4’

(5m) and 60° in front of the projector.

16.4’

(5 m)

60°

Operating Range

Remote Control Unit

at a esa d u ctos

Remote Control Code

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Canon lv 7230 in the language / languages: English as an attachment in your email.

The manual is 4,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Canon lv 7230 Manual

Product: