479076
176
Zoom out
Zoom in
Previous page
1/203
Next page
176 Additional Information
Do not disconnect the USB cable or the power source until you safely end the connection from
the computer. Cannot write data with this connection. To write data to the camcorder,
connect the compact power adapter then reconnect the camcorder and computer.
- The camcorder cannot be operated while it is not being powered by the compact power
adapter and is connected to a computer with the supplied USB cable. In addition, scenes
recorded with this camcorder and previously saved on a computer cannot be written back to
the camcorder and music files cannot be transferred from the supplied Camcorder Supple-
mental Disc. To avoid corrupting the data in the camcorder's memory, use the computer's
Safely Remove Hardware function to end the connection and disconnect the USB cable before
using the camcorder.
- To be able to write back scenes recorded with this camcorder that were previously saved on a
computer and transfer music files from the supplied Camcorder Supplemental Disc, restore
the connection in the following way. Use the computer's Safely Remove Hardware function to
end the connection, disconnect the USB cable, power the camcorder using the compact
power adapter and only then connect it to the computer again.
Do not disconnect the USB cable or the power source until you safely end the connection from
the computer. Connect the compact power adapter
- When the camcorder is in mode and is connected to the computer with the supplied
USB cable, the camcorder cannot be operated. Disconnecting the USB cable or power source
while this message appears may result in permanent loss of the recordings in the camcorder.
Use the computer's Safely Remove Hardware function to end the connection and disconnect
the USB cable before using the camcorder.
- To be able to write back scenes recorded with this camcorder that were previously saved on a
computer and transfer music files from the supplied Camcorder Supplemental Disc, power
the camcorder using the compact power adapter and only then connect it to the computer
using the supplied USB cable.
Error writing on the memory card. Data may be recovered if the memory card has not been
removed. Attempt recovering the data?
- This message will appear the next time you turn on the camcorder if power supply was acci-
dentally interrupted while the camcorder was writing on the memory card. Select [Yes] to try
to recover the recordings. If you removed the memory card and used it with another device
after this happened, we recommend you select [No].
File name error
-T
he folder and file numbers have reached their maximum value. Set
88
[Photo Number-
ing] to [Reset] and delete all the photos on the memory card (
0
103) or initialize it
(0 38).
Initialize only using the camcorder
- There is a problem with the file system that prevents accessing the selected memory. Initial-
ize the memory with this camcorder (0 38).
LCD Screen has been dimmed
-Hold h
pressed for 2 seconds to restore the LCD screen to its previous brightness set-
ting.
176


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Legria HFS30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Legria HFS30 in the language / languages: English as an attachment in your email.

The manual is 6,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon Legria HFS30

Canon Legria HFS30 User Manual - German - 223 pages

Canon Legria HFS30 User Manual - Dutch - 204 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info