709360
97
Zoom out
Zoom in
Previous page
1/129
Next page
Menu Options
97
[Digital Zoom]: Determines the operation of the digital zoom.
When you zoom, once you exceed the optical zoom range, the camcorder will automatically switch
to digital zoom.
With the digital zoom the image is digitally processed, so the image resolution will deteriorate the
more you zoom in.
Digital zoom is not available in mode or when > [v Camera Setup] > [Conversion
Lens] is set to [¿ WA-H58].
[Focus Preset Speed]: Determines the speed at which the focus changes to the preset position.
[Auto Backlight Correction]: When set to [i On], the camcorder will automatically detect and
compensate the exposure for backlit subjects. This is useful in situations in which the subject is not
constantly backlit.
Automatic backlight correction is not available in the following cases:
- When the camcorder is in mode.
- When the shooting mode is n, [Q Night Scene], [K Snow], [L Beach], [M Sunset],
[S Spotlight] or [T Fireworks].
[Auto Slow Shutter]: The camcorder automatically uses slow shutter speeds to obtain brighter
recordings in places with insufficient lighting.
When this setting is set to [i On], the minimum shutter speed used is: 1/25 (50.00P) or 1/12
(25.00P).
The auto slow shutter is available only during mode or when the shooting mode is set to
[Programmed AE].
If a trailing afterimage appears, set the slow shutter to [j Off].
We recommend stabilizing the camcorder, for example, by mounting it on a tripod.
The camcorder will not use auto slow shutter when the AGC limit is set.
[Flicker Reduction]: When set to [k Automatic], the camcorder will automatically detect and reduce
flicker.
When recording under light sources such as fluorescent, mercury or halogen lamps, the screen may
flicker depending on the shutter speed. You may be able to avoid flicker by setting the shutter speed
mode to a value matching the frequency of the local electrical system: 1/100 for 50 Hz systems,
1/60 for 60 Hz systems.
[Conversion Lens]: When you attach to the camcorder the optional TL-H58 Tele-converter or WA-H58
Wide Attachment, set the appropriate conversion lens setting. The camcorder will then optimize the
image stabilization and adjust the minimum object distance. The minimum object distance throughout
the entire zoom range will be 130 cm for the tele-converter and about 60 cm for the wide attachment.
When you select [¿ WA-H58] and you zoom in, the zoom position marker will stop before reaching
the end of the zoom bar.
The tele-converter increases the focal length by a factor of approximately 1.5 while the wide
attachment decreases it by a factor of approximately 0.75.
When you select a setting other than [j Off], the AF mode is automatically set to [@ Normal
AF].
The approximate focusing distance displayed on the screen will change depending on the setting. If
you are not using an optional conversion lens, select [j Off].
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon LEGRIA HF G50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon LEGRIA HF G50 in the language / languages: English as an attachment in your email.

The manual is 3,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon LEGRIA HF G50

Canon LEGRIA HF G50 User Manual - German - 134 pages

Canon LEGRIA HF G50 User Manual - Dutch - 129 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info