708912
57
Zoom out
Zoom in
Previous page
1/146
Next page
Exposure Adjustment
57
Using the Zebra Pattern
You can use the zebra pattern to identify areas that might be overexposed, so you can correct the
exposure appropriately. The camcorder offers two levels of zebra pattern: With 100% only areas that
will lose detail in the highlight areas will be identified, while 70% will identify also areas that are
dangerously close to losing detail.
1 From the exposure adjustment screen (A 56), touch [w] to select the zebra level.
2 Touch [70%] or [100%] and then touch [K].
3Touch [z] or [{] and then touch [X].
The zebra pattern will appear on the overexposed areas of the picture.
Touch again to turn off the zebra pattern.
NOTES
Using the zebra pattern will not affect your recordings.
Exposure Compensation
When you use a recording program other than [P Fireworks] or [n Manual Exposure], the
camcorder will adjust the exposure automatically. However, you can compensate and lock the
exposure or use the Touch AE function to automatically set the optimal exposure for the subject you
select. This is convenient when the brightness of the subject you want to shoot is noticeably brighter/
darker than the general brightness of the image.
POINTS TO CHECK
Select a recording program other than [P Fireworks] or [n Manual Exposure].
1 Open the exposure adjustment screen.
[FUNC.] > [y Exposure]
The exposure adjustment screen appears.
2 Touch a subject that appears inside the y frame.
The Touch AE mark (I) will flash and the exposure will be adjusted automatically so the area you
touched will be correctly exposed. You have the option to further adjust the exposure manually as
necessary. Depending on the subject, you may want to use the [Highlights] setting as described
below.
You can touch [n] instead to compensate the exposure without activating the Touch AE
function.
The manual adjustment dial appears and the adjustment value is set at ±0.
•Touch [n] again to return the camcorder to automatic exposure.
3Touch [Ï] or [Ð] or drag your finger along the dial to set the exposure compensation
value.
The adjustment range may vary depending on the initial brightness of the image, and some
values may be grayed out.
Before touching [X], you can also use the zebra pattern (A 57).
Operating modes:
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon Legria HF G26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon Legria HF G26 in the language / languages: English as an attachment in your email.

The manual is 4,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info