When the logic board ass'y is replaced, reset the waste ink counter. In addition, according to the waste ink amount, replace the waste ink absorber (the bottom case
unit or the ink absorbers). The standard amount for waste ink absorber replacement is given in the table below.
*1: Check the waste ink amount by service test print or EEPROM information print.
[See 3.3. Adjustment / Settings, (6) Service mode, for details.]
(5) User mode
<Standalone printer operation>
1) Turn on the printer.
2) Press and hold the Resume/Cancel button until the LED blinks the specified number of times listed in the table below, and release it. The operation starts.
Waste ink amount
*1
Bottom case unit or ink absorber replacement
Less than 7%Not required.
7% or moreRequired.
FunctionProceduresRemarks
Print head manual cleaning- Cleaning both black and color:
See "Standalone printer operation" below.
- Cleaning black or color separately, or both black and color:
Perform from the printer driver's Maintenance tab.
Print head deep cleaning- Cleaning black or color separately, or both black and color:
Perform from the printer driver's Maintenance tab.
Paper feed roller cleaningSee "Standalone printer operation" below.
Nozzle check pattern printing
See "Standalone printer operation" below.
Also available from the printer driver's
Maintenance tab.
Print head alignmentSee "Standalone printer operation" below.In Custom Settings of the printer driver's
Maintenance tab, manual print head alignment (by
selecting the optimum values) as with the
conventional models can be performed.
Bottom plate cleaningPerform from the printer driver's Maintenance tab.Cleaning of the platen ribs when the back
side of paper gets smeared.
Print head replacementThe print head is replaceable at the same position as for
ink tank replacement. (Open the access cover. When the
carriage stops at the center, the print head can be
replaced.)
LED blinkingOperationRemarks
1 timePrint head manual cleaning
2 timesNozzle check pattern printingSet a sheet of plain paper (A4 or letter) in the ASF or the cassette (according
to the Paper Feed switch setting).
3 timesPaper feed roller cleaning
4 timesAutomatic print head alignmentSet a sheet of plain paper (A4 or letter) in the ASF.
5 timesBottom plate cleaningFold a sheet of plain paper (A4 or letter) in half crosswise, then unfold and set
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Canon iP4000 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Canon iP4000 in the language / languages: English as an attachment in your email.
The manual is 3,29 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.