2-2. Service Call Errors (by LED Blinking in Orange and Green Alternately, or Lit in Orange)
*1: Before replacement of the logic board ass'y, check the waste ink amount (by service test print or EEPROM information print). If the waste ink amount is 7% or
more, also replace the bottom case unit (QM2-1205) or the ink absorbers (QC1-4222 / 4223 / 4224 / 4263 / 4264 / 4864 / 4221 / 4257) when replacing the
logic board ass'y.
[See Section 3
-3. Adjustment / Settings, (6) Service mode, for details.]
*2: Reset the waste ink counter when replacing the bottom case unit.
[See Section 3
-3. Adjustment / Settings, (6) Service mode, for details.]
LED alternate blinking
in orange and green
Error [Error code]
Solution
(Replacement of listed parts, which are likely to be faulty)
2 timesCarriage error [5100]- Carriage unit (QM2-1209)
- Timing slit strip film (QC1-4284)
- Logic board ass'y (QM2-1548)
*1
- Carriage motor (QK1-0545)
3 timesPaper feed error [6000]- Timing sensor unit (QM2-1213)
- Timing slit disk film (QC1-4833)
- Feed roller ass'y (QL2-0598)
- Platen unit (QM2-1215)
- Logic board ass'y (QM2-1548)
*1
- PAPER FEED MOTOR (QK1-0550)
4 timesPurge unit error [5C00]- Purge unit (QM2-1210)
- Logic board ass'y (QM2-1548)
*1
5 timesASF (cam) sensor error [5700]- Sheet feed unit (QM2-1220)
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Canon iP4000 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Canon iP4000 in the language / languages: English as an attachment in your email.
The manual is 3,29 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
