19294
6
Zoom out
Zoom in
Previous page
1/33
Next page
1. MAINTENANCE
1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer
(1) Adjustment
Note: DO NOT loosen the red screws on both sides of the main chassis, securing the carriage shaft positioning.
*1: Red screws of paper feed motor
The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit.
(2) Periodic maintenance
No periodic maintenance is necessary.
(3) Periodic replacement parts
There are no parts in this printer that require periodic replacement by a service engineer.
(4) R
eplacement consumables
There are no consumables that require replacement by a service engineer.
Adjustment Timing Purpose Tool
Approx.
time
EEPROM
initialization
(EEPROM settings)
At logic board ass'y replacement
To initialize settings other than the following:
- USB serial number
- Destination setting
- Waste ink counter
- CD-R correction value
None. 1 min.
Destination settings
(EEPROM settings)
At logic board ass'y replacement To set the destination. None. 1 min.
Waste ink counter
resetting
(EEPROM settings)
- At bottom case unit replacement
- At ink absorber (QC1-4221
/ 4222 / 4223 /
4224 / 4263 / 4264 / 4864 / 4257)
replacement
To reset the waste ink counter. None. 1 min.
CD-R sensor /
automatic print head
alignment sensor
correction (EEPROM
settings)
- At logic board ass'y replacement
- At carriage unit replacement
To correct the CD-R and automatic print head
alignment sensor.
None. (Correction
performed through
service test print)
2 min.
Print head alignment - At print head replacement
- At logic board ass'y replacement
- At carriage unit replacement
To ensure accurate dot placement. - None. (printer buttons)
- Computer (settings via
the printer driver)
2 min.
Paper feed motor
position adjustment
*1
At paper feed motor unit replacement To adjust the belt tension. (Position the paper
feed motor so that the belt is stretched tight.)
None. 2 min.
Grease application - At carriage unit replacement
- At chassis' upper gear replacement
- At shaft lift (QC1-4331) replacement
- To maintain sliding properties of the carriage,
carriage shaft, and shaft lift.
- To protect the chassis' upper gear.
- FLOIL KG-107A (QY9-
0057)
- MOLYKOTE HP300
(QY9-0035)
1 min.
1 - 1
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon iP4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon iP4000 in the language / languages: English as an attachment in your email.

The manual is 3,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info