55777
86
Zoom out
Zoom in
Previous page
1/103
Next page
86
Trouble?
List of Messages
Some error messages will disappear after being displayed for about 4 seconds.
Message Explanation/Solution
SET THE TIME ZONE,
DATE AND TIME
You have not set the time zone, date and time. This message
appears each time you turn the power on until you set the time
zone, date and time.
22
CHANGE THE BATTERY
PACK
Battery pack is exhausted. Replace or charge the battery pack. 16
THE TAPE IS SET FOR
ERASURE PREVENTION
Cassette is protected. Replace the cassette or change the position
of the protect switch.
90
REMOVE THE CASSETTE Camcorder stopped operating to protect the tape. Remove the
cassette and reinsert it.
18
CHECK THE HDV/DV
INPUT
(Appears only if a DV cable is
connected)
The DV cable is not correctly connected to the HDV/DV terminal, or
the connected digital device is turned off.
64
The video input signal is in a different television system (NTSC).
CONDENSATION HAS
BEEN DETECTED
Condensation has been detected in the camcorder. 92
CONDENSATION HAS
BEEN DETECTED
REMOVE THE CASSETTE
Condensation has been detected in the camcorder. Remove the
cassette.
92
TAPE END Tape reached the end. Rewind the tape or replace the cassette.
INCORRECT TAPE
SPECIFICATION
You attempted to play back a tape recorded in a different television
system (NTSC) or in a recording standard not supported by this
camcorder.
INPUT SIGNAL NOT
SUPPORTED
The digital device connected with the DV cable is incompatible with
the camcorder.
PLAYBACK STD LOCKED
INCOMPATIBLE VIDEO
INPUT
Current camcorder settings do not match the HDV/DV standard of
the video input signal. Change the [PLAYBACK STD] setting to
match the video input signal.
38
PLAYBACK STD LOCKED
PLAYBACK IS
RESTRICTED
Current camcorder settings do not match the HDV/DV standard of
the recording you tried to play back. Change the [PLAYBACK STD]
to match the recording standard of the tape.
38
HEADS DIRTY, USE
CLEANING CASSETTE
Video heads are dirty. Clean the video heads. 92
NO CARD There is no memory card in the camcorder. 18
NO IMAGES No images are recorded on the memory card.
CARD ERROR A memory card error occurred. The camcorder cannot record or
display the image.
The error may be temporary. If the message disappears after 4
seconds and “ ” flashes red, turn the camcorder off, remove the
card and reinsert the card. If “ ” changes to green or yellow, you
can continue recording/playback.
CARD FULL Memory card is full. Erase some images to free some space or
replace the memory card.
62
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon HV20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon HV20 in the language / languages: English as an attachment in your email.

The manual is 9,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon HV20

Canon HV20 User Manual - German - 114 pages

Canon HV20 User Manual - Dutch - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info