55775
63
Zoom out
Zoom in
Previous page
1/89
Next page
Connecting to a Computer
External Connections
63
E
Transferring Video Recordings
You can transfer recordings to a computer
using the HDV/DV terminal.
Equipment and System Requirements
A computer equipped with an
IEEE1394 (DV) terminal or an IEEE1394
(DV) capturing board.
A DV cable (Use the optional CV-150F
(4 pin-4 pin) or CV-250F (4 pin-6 pin) DV
Cable).
Video Editing Software.
The appropriate driver
The standard of the video transferred
depends on the standard of the original
recording and the compatibility of the
video editing software.
When transferring a video originally
recorded in HDV standard, if the editing
software supports high definition video,
the video transferred will be in HDV
standard too. If the editing software does
not support high definition video, even if
the original recording was made in HDV
standard, the video transferred will be in
DV standard.
POINTS TO CHECK
Change the following settings as necessary
before making the connections. Refer to the
corresponding explanation of each setting in the
PLAY/OUT SETUP
menu option list
(32).
- [PLAYBACK STD] and [DV OUTPUT] to
select the standard of the output video. Note
that the video standard of the transferred video
depends also on the standards supported by
the editing software.
- [AV DV] to select whether to transfer
recordings from the tape in the camcorder (set
to [ OFF]) or video converted from an
external analog source (set to [ ON]).
Connecting
1 Start the computer.
2 Set the camcorder to
mode.
3 Connect the camcorder to the
computer using the digital
connection –connection type
( 62)– shown in the previous
section
PC Connection Diagrams
.
When the connection is recognized
HDV/DV” will be displayed. When
the video output starts the display will
change to “ HDV-OUT” or “ DV-
OUT” depending on the original
recording and the settings selected.
4 Start the video editing software.
Refer to the instruction manual of the
editing software.
IMPORTANT
The video transfer may not work correctly
depending on the software and the
specifications/settings of your computer.
If the computer freezes while the camcorder
is connected to it, disconnect the DV cable and
turn off the camcorder and the computer. After a
short while, turn them on again, set the
camcorder to mode and restore the
connection.
Before connecting the camcorder to the
computer using a DV cable, make sure that the
camcorder and computer are not connected
with a USB cable, and that no other IEEE1394
device is connected to the computer.
Depending on the video editing software, you
may need to set the POWER switch of the
camcorder to a mode other than PLAY. Refer to
the instruction manual of the editing software.
NOTES
We recommend powering the camcorder
using the compact power adapter.
Refer also to the instruction manual of the
computer.
The programs ZoomBrowser EX and Image
Browser included with the supplied CD-ROM
can only be used to transfer still images
recorded on the memory card. Video recordings
on the tape cannot be transferred to the
computer using the software included with the
supplied CD-ROM.
2
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon HV10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon HV10 in the language / languages: English as an attachment in your email.

The manual is 5,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Canon HV10

Canon HV10 User Manual - German - 100 pages

Canon HV10 User Manual - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info