291389

Canon gl2 digital camcorder Manual

17
Zoom out
Zoom in
Previous page
1/163
Next page
17
E
Preparations
Your battery pack was partially charged before it left the factory. It should have enough power for
you to check that your camcorder is working properly. However, you must charge the battery pack
fully if you want it to power the camcorder for more than a few minutes.
1. Attach the battery pack to the power adapter.
• Make sure the DC coupler is not connected.
• Align the triangle on the battery pack with the line on the power adapter.
• Slide the battery across until it clicks into place.
2. Connect the power cord to the power adapter.
3. Plug the power adapter into a household power socket.
• The charge indicator flashes red to show that charging is in progress. Single flashes mean that
the battery pack is less than 50% charged. Double flashes mean that it is between 50% and
75% charged. Triple flashes mean that it is more than 75% charged.
• The indicator glows steadily when the battery pack is fully charged.
4. Take the battery pack off the adapter and attach it to the camcorder.
• Extend the viewfinder and rotate it upwards.
• Align the triangle on the battery pack with the line on the camcorder, then slide the battery in
the direction of the arrow until it clicks into place.
5. Remove the battery pack after use.
•Press and hold the BATT. RELEASE button, while you slide the battery up.
• Always turn the camcorder off and raise the viewfinder before removing the power source.
Notes:
•You can find detailed notes for using the batteries in “Notes on Using the Batteries” ( 136).
These notes include charging and recording times and how to charge the backup battery.
• Using the optional CH-910 Dual Battery Charger/Holder you can power the camcorder from two
battery packs for longer continuous recording. You can exchange the battery packs independently
without cutting the power to the camcorder. In addition, the CH-910 can charge two batteries
consecutively when it is connected to a household power socket.
Charging and Attaching the Battery Pack
1
3
2
4
5
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon gl2 digital camcorder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon gl2 digital camcorder in the language / languages: English as an attachment in your email.

The manual is 3,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info