424323

Canon fax l380 Manual

91
Zoom out
Zoom in
Previous page
1/224
Next page
Different Ways to Receive a Fax
7-2
Receiving Faxes
7
Setting the Receive Mode
Set the machine receive mode as follows:
1
Open One-Touch Speed Dial panel ➞ press [Receive Mode].
The LCD display shows the current receive mode setting.
2
If you want to change the receive mode, press [Receive Mode] repeatedly until the mode you want
appears ➞ press [OK].
Each time you press [Receive Mode], the receive mode changes in the following order:
FaxOnly ➞ Manual ➞ AnsMode ➞ FaxTel ➞ FaxOnly ➞ …
Receiving Faxes and Phone Calls Automatically:
FaxTel Mode
Set this mode if you want your machine to automatically switch between voice and fax calls.
You can control precisely how your machine handles incoming calls by adjusting the settings below.
Setting the Options for FaxTel Mode
■ RING START TIME
When a call comes in, the machine checks to see if it is a person wishing to speak to you or a fax machine trying to
send a document. If your machine does not have enough time to detect the fax tone, it assumes the call is from a
telephone. Use the <RING START TIME> setting to increase the time the machine takes to check whether a call is
from a fax machine or a telephone. You can select a time between 0 and 30 seconds; the default is 8 seconds.
■ F/T RING TIME
When your machine is set to receive both fax and telephone calls automatically, the telephone rings to alert you to
pick up the handset if the call is from a person. If you do not pick up the handset within a certain amount of time, the
telephone stops ringing. Use this option to change the number of times the machine rings, from 10 to 60 seconds.
The default is 22 seconds.
■ F/T SWITCH ACTION
Not all fax machines are capable of sending a fax tone (the CNG tone that warns the receiving fax machine that a
fax is coming). For those cases the machine may think that the call coming in is a voice call and rings to alert you of
the call (the amount of time it is going to ring is determined by the <F/T RING TIME> setting above). If you do not
answer the call, one of two things can happen:
1. If you set the <F/T SWITCH ACTION> to ‘RECEIVE’, the machine will switch to fax receive mode automatically at
that point and start to receive the document. If no document comes in, it disconnects the call after approx. 40
seconds. The factory default setting is ‘RECEIVE’.
2. If you set the <F/T SWITCH ACTION> to ‘DISCONNECT’, the machine will disconnect the phone call
immediately freeing up your phone line at this point.
… 91 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon fax l380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon fax l380 in the language / languages: English, Dutch as an attachment in your email.

The manual is 5,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info