424317
11
Zoom out
Zoom in
Previous page
1/31
Next page
9
Set Up the Machine
Connect the Power Cord
1 Connect the power cord into the rear socket on the back side of the machine and the wall outlet.
2 The machine enters the standby mode.
Ex.
30/06 2007 SAT 15:50
FaxOnly STANDARD
The LCD display is turned o :
The machine may enter the sleep mode while you are setting up the machine. Press [Energy Saver] to turn the machine back on and continue the setup.
<CLOSE COVER/TONER COVER> is displayed:
Make sure that the toner cover and scanning platform are closed properly. (See “Install Toner Cartridge, on p. 5.)
<SET PAPER AGAIN/SET TONER AGAIN> is displayed:
Check the installation of the toner cartridge and the placement of the paper. (See “Install Toner Cartridge, on p. 5 and “Load Paper, on p. 7.)
This product emits low level magnetic  ux. If you use a cardiac pacemaker and feel abnormalities, please move away from this
product and consult your doctor.
If you loaded paper other than A4, make sure to set the correct paper size in the machine. (See Chapter 2, “Document and Paper,
in the Reference Guide.)
Any data stored in the memory, including received fax documents, will be deleted if you unplug the power cord from the
machine.
During electrical storms, disconnect the power cord from the power outlet. (Please note that received documents stored in the
machine’s memory may be lost when you unplug the machine.)
Whenever you unplug the machine, wait at least  ve seconds before you plug it in again.
Do not plug the machine into an uninterruptible power supply (UPS).
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon fax l160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon fax l160 in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info