424242
76
Zoom out
Zoom in
Previous page
1/87
Next page
74 Troubleshooting
LCD Messages
The following messages are displayed on the LCD when the fax is performing a function or
encounters an error.
!!CHECK!! 5100
!!CHECK!! 5B00
AUTO REDIAL
BUSY/NO SIGNAL
Cause Action
Movement of the FINE Cartridge
Holder is blocked.
Clear the paper jam or foreign object that is preventing the FINE Cartridge
Holder from moving, then turn off the machine and turn it back on again.
There may be an obstruction that is not
allowing the Cartridge Holder
mechanism to move.
Check for any obstruction (paper clip, small object, etc.) and also that the
protective tape are removed from the FINE Cartridge. Check also for a paper
jam and clear the jam if necessary (see page 65). Then press [Stop] and start
again.
The FINE Cartridge may be defective. Press [Stop]. Reinstall the FINE Cartridge (see the Easy Setup Instructions) and
start again.
In either case, if the error does not clear, try unplugging the fax. Wait several
minutes, then plug it back in. Also, try replacing the FINE Cartridge with a new
one (see page 55).
During printing, the FINE Cartridge
print head may have become too hot.
Allow the fax to cool down. The fax will resume printing when it has cooled
down.
An error requiring servicing might have
occurred.
Turn OFF the machine, and unplug the power cord of the machine from the
power supply. After a while, plug the power cord of the machine back in and turn
ON the machine. If the same error occurs, contact a Canon service
representative.
Cause Action
The ink absorber (which holds the ink
used for print head cleaning) may be
full.
Contact a Canon service representative as early as possible.
Cause Action
The fax is waiting to redial the receiving
number because the line was busy or
the receiving party did not answer
when you tried to send the document.
Wait for the fax to automatically redial the number. If you want to cancel
automatic redialing, press [Stop] (see page 23).
Cause Action
The telephone number you dialed is
busy.
Try sending the document at a later time.
The fax number dialed was incorrect. Check the fax number and dial again.
The other party’s fax machine is not
working.
Contact the other party and have them check their fax machine.
The other party is not using a G3
machine.
Contact the other party and ask them to send or receive the document using a
G3 machine.
The touch tone/dial pulse setting on
your fax is incorrect.
Set your fax to the setting that matches your telephone line (see page 9).
The receiving fax machine did not
answer within 55 seconds (after all
automatic redialing attempts).
Contact the receiving party and have them check their fax machine. You can try
to send the document using manual sending (see page 18). For long-distance
call, add pauses to the registered number (see page 22).
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon fax jx 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon fax jx 500 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info