424242
58
Zoom out
Zoom in
Previous page
1/87
Next page
56 Routine Maintenance
z Press [Stop] to cancel the current print job.
When printing is finished, replace the FINE Cartridge immediately. If you continue printing with
an empty FINE Cartridge, it will be a cause of trouble.
z Setting Automatic Printing
When the ink is low, you can set the receiving fax either automatic printing or storing in memory.
1 Press [Menu].
2 Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy]. The
LCD displays <USER SETTINGS>.
3 Use [{] or [}] to select <RX SETTINGS>, then press [Start/Copy]. The LCD
displays <ECM RX>.
4 Use [{] or [}] to select <OPTION SETTINGS>, then press [Start/Copy]. The LCD
displays <OFF>.
z To disable ink low automatic printing, use [{] or [}] to select <OFF>, then press [Start/
Copy]. Press [Stop] to return to standby mode.
z To enable automatic printing, use [{] or [}] to select <ON> and continue with the steps
below.
5 Press [Start/Copy].
6 Press [Stop].
The fax returns to standby mode.
What is a Low Ink Warning?
The machine counts the amount of ink used and when the remaining level reaches a preset level
the Low Ink Warning lamp beside the LCD display lights up to advise you that the FINE Cartridge
is running out of ink.
z When the <RECOMEND NEW CRT>, or <NO INK> message appears on the LCD.
The ink level of the FINE Cartridge showing <RECOMEND NEW CRT> is low. The ink level of
the FINE Cartridge showing <NO INK> is empty. You should ensure you have a new FINE
Cartridge.
z When the <INK VOL UNKNOWN> appears on the LCD.
If you install the FINE Cartridge that was once empty, the <INK VOL UNKNOWN> message
appears in the LCD. In this case, the remaining level of ink cannot be counted correctly. We
recommend that you replace the FINE Cartridge with a new one.
Holding [Stop] cancels the error indication and enables continuation of printing.
However, the error detection function is disabled after the error indication is canceled, therefore,
Low Ink Warning message does not appear later on. When you install a new FINE Cartridge, the
Low Ink Warning is enabled automatically.
RECOMEND NEW CRT
]
NO INK
INK VOL UNKNOWN
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canon fax jx 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canon fax jx 500 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info